30-1
Clutch mechanism, servicing
CAUTION!
Before disconnecting the battery:
Determine the correct coding for the anti-
theft radio.
Switch the ignition off (also applies when
connecting the battery). Failure to do so may
damage the Engine Control Module (ECM).
Part numbers are listed here for reference
only. Always check with your Parts
department for the latest information.
Notes:
Lubricate all bearings and contact surfaces with
G 052 142 A 2 polycarbamide grease.
Before
working on
the pedal
cluster,
remove the
driver's side
storage
compartment
Pa
ge 1 of 22 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.30.1
30-13
Clutch master cylinder, removing and
installing
Special tools and equipment
3094 hose clamp
Removing
CAUTION!
Before working on the electrical system:
Determine the correct coding for the anti-
theft radio.
Switch the ignition off (also applies when
connecting the battery). Failure to do so may
damage the Engine Control Module (ECM).
Disconnect the battery Ground (GND)
strap.
To remove E-box from plenum chamber:
- Remove bolts (arrows) and remove cover.
- Remove Engine Control Module (ECM); if necessary remove 8-pin
relay support Repair Manual, Electrical Equipment, Repair Group 97- Disconnect harness connectors at connector station.
Pa
ge 14 of 22 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.30.1
