Chapter 9 - Specifications
pg. 123 Specifications
Specifications
This chapter contains facts and figures pertaining to the technical specifications of your car.
Oil/Fluids specifications
124
Engine specifications125
Cooling/fuel/distributor ignition systems126
Front/rear suspensions126
Transmission, Capacities, Vehicle loading127
Electrical system/bulbs128
Dimensions and weights129
Service manuals, Road assistance130
pg. 124 Oil/fluid specifications
Oil quality
Meeting API specification SG, SG/CD, SH or Energy Conserving (EC) II
For best fuel economy and engine protection, consult with your authorized Volvo retailer for recommended oils. Oil
with a different quality rating may not provide adequate engine protection. Synthetic oils complying with oil quality
requirements are recommended for : driving in areas of sustained temperature extremes (hot or cold), when towing a
trailer over long distances or for prolonged driving in mountainous areas.
Extra oil additives must not be used unless advised by an authorized Volvo retailer.
NOTE: SAE 15 W -40 oil should only be used in extreme operating conditions such as trailer towing in sustained
ambient temperatures over 104° F (40° C). However, SAE 10W -30 synthetic oil would be a better alternative in such
conditions.
SAE 15W-30 should not be used under normal operating conditions.
Viscosity (stable ambient temperatures):
Engine oilQuality: Meeting API specification SG or
SH Capacity (incl. filter): 6.1 US qts. (5.8
liters)*
Automatic transmission
fluid Quality:
ATF Dexron IIE/ III and Mercon Capacity: 8 US qts. (7.6 liters)
ProCarManuals.com
