1999 SUZUKI BALENO Break

60G-74E

BEFORE DRIVING

72F-03-002E

Central door locking system (if equipped)

You can lock and unlock all the side doors and

simultaneously by using the key in the driver's

door lock or the front passenger's door lock.
60G-03-006E

You can also lock or unlock all the side

doors by depressing the right or left of the

switch ©, respectively.

NOTE:

• Moving the lock knob on each door locks

or unlocks that door only.

• Be sure to hold the door handle up when

you close a locked front door, or the door

will not remain locked.
60G-03-005

Child-Proof Locks (if equipped)

As illustrated, a child-proof lock is provided

for both rear doors. When the lock lever is

down, position ©, the child proof lock is

activated, and when up, in position © the

child-proof lock is deactivated, when the

child-proof lock is activated, the rear door

cannot be opened from the inside even if

the inside door lock is unlocked but can be

opened from the outside.

3-4

BEFORE DRIVING
80G-74E

70F-01-008E

Trunk (Boot) Ud

To unlock the lid, insert the key and turn it

clockwise. You can also unlock the lid by pulling

the release lever located on the outboard side

of the driver's seat.
60G-03-007E

3-5
18
Be sure to place the child-proof lock

in the locked position whenever

children are seated in the rear.

CAUTION

Do not use the key to lift up the lid,

or the key may break off In the lock.

Always make sure that the trunk lid Is

closed and latched securely. Closing

the lid completely helps to prevent

exhaust gases from entering the car.

Do not keep the trunk lid open for a long

time, or the battery will discharge.

60G-74E
BEFORE DRIVING

DRIVER SEAT HEIGHT ADJUSTER

(if equipped)
ADJUSTABLE HEAD RESTRAINTS

(if equipped)

606-03-015

If the driver's seat is equipped with a seat

height adjuster knob on the outboard side of

the seat, adjust the seat to the proper height

by turning the adjuster knob.

WARNING
72F-03-014

Adjusting Seatbacks

The seatbacks can be adjusted to different

angles. To adjust the seatback angle, pull up

the lever on the outboard side of the seat,

move the seatback to the desired position, and

release the lever to lock the seatback in place.

Seatbacks should always be in an

upright position when driving, or seat

belt effectiveness may be reduced. Seat

belts are designed to offer maximum

protection when seatbacks are in the

fully upright position.
70F-01-019

WARNING

Head restraints are designed to help reduce

the risk of neck injuries in the case of an

accident. Adjust the head restraint to the

position which places the top of the head

restraint closest to the top or your ears.

23

3-10

BEFORE DRIVING

60G-74E

SEAT BELTS

60G-03-016

To raise the head restraint, pull upward ort the

restraint until it clicks. To lower the restraint,

push down on the restraint while holding in

the lock lever. If a head restraint must be

removed (for cleaning, replacement, etc.),

push in the lock lever and pull the head

restraint all the way out.
70F-01-022E

Wear your Seat Belts at All Times.

WARNING

Never allow persons to ride in the

cargo area of a vehicle. In the event

of an accident, there is a much

greater risk of injury for persons who

are not riding In a seat with their seat

belt securely fastened.

Seat belts should always be adjusted

so the lap portion of the belt is worn

low across the pelvis, not across the

waist. Shoulder straps should be
WARNING

1 worn on the outside shoulder only,

and never under the arm. Seat belts

should never be worn with the straps

twisted and should be adjusted as

tightly as is comfortable to provide

the protection for which they have

been designed. A slack belt will

provide less protection than one

which is snug.

Make sure that each seat belt buckle

is inserted into the proper buckle

catch. It is possible to cross the

buckles in the rear seat.

Do not wear your seat belt over hard

or breakable objects in your pockets

or on your clothing. If an accident

occurs, objects such as glasses,

pens, etc. under the seat belt can

cause injury.

Never use the same seat belt on

more than one occupant and never

attach a seat belt over an infant or

child being held on an occupant's

lap. Such seat belt use could cause

serious injury in the event of an

accident. _K

3-11
24

OTHER CONTROLS AND EQUIPMENTS
60G-74E

FRONT SEAT BACK POCKET

(if equipped)
REAR SPOILER WITH STOP LAMP

Other Controls (if equipped)

63B-06-022

This pocket is provided for holding light and

soft things such as gloves, newspapers or

magazines.

Do not put hard or breakable objects

In the pocket. If an accident occurs,

objects such as bottles, cans etc. can

injure the occupants in the rear seat.
60G-50-002E

Rear Spoiler is provided to improve

aerodynamic stability at higher speeds and

better asthetics. Stop Lamp (if equipped) is

fitted inside the Rear Spoiler. The stop lamp

will glow as and when the Brake Pedal is

depressed.

CAUTION

Never close the dicky door too hard or

with jerk or lift the dicky by holding

spoiler, rear spoiler may get damaged.

Close the dicky door gently and make

sure it is closed properly.
ALLOY WHEELS

Maintenance with tyre wears (if equipped)

60G-50-003E

Wider alloy wheels are provided in the vehicle

for better grip on the road and more fuel

economy. For balancing of wheels please

consult MARUTI authorised workshop.

CAUTION

Never try to remove the tyre from alloy

wheel rim in convention manner (by

hammering), it will damage the wheel

rim. Always insist on tyre changing

machine.

6-9
62

60G-74E

OTHER CONTROLS AND EQUIPMENT

POWER ANTENNA Other Controls

(if equipped)
LEATHER COVER

Steering Column Controls (if equipped)

60G-50-004E

60G-50-006E

Power antenna on the rear side will

automatically come up on switching on the

AM/FM receiver fitted in the vehicle.
For better control on steering wheel leather

cover is provided.
HIGH MOUNT STOP LAMP

(if equipped)

High mount stop lamp is provided with your

vehicle and is fitted on rear parcel tray. The

stop lamp will glow as when the brake pedal

will be depressed.

To change the bulb of the stop lamp, remove

the clips at both sides of the cover, by

pressing the inner pin inside so that the clip

gets loose and remove the bulb on turning

it anticlock-wise

The rating of bulb is 21W/12V.There are one

bulb in high mount stop lamp.

63

6-10

60G-74E
INSPECTION AND MAINTENANCE

60G-09-033

60G-09-034

60G-09-035

Rear combination light (tail, stop, turn Registration plate tight Trunk (boot) light (if equipped)

signal, etc.) Undo the two screws and remove the light Turn the lens counterclockwise and pull it off.

Undo the screws that secure the housing and housing.

remove the housing by sliding in the direction

of the white arrow in the illustration.

111

9-28

INSPECTION AND MAINTENANCE

60G-74E

WIPER BLADES

60G-09-036

High mount stop light

Trust this replacement job to your authorized

MARUTI dealer.
70F-07-059

If the wiper blades become brittle or damaged,

or make streaks when wiping, replace the

wiper blades.

To install new wiper blades, follow the

procedure below.

CAUTION

To avoid scratching or breaking the

window, do not let the wiper arm strike

the windshield while replacing the

wiper blade.
NOTE:

Some wiper blades may be different from the

ones described here depending on vehicle

specifications. If so consult your MARUTI

dealer for proper replacement method.

The left and the right wiper arm

assemblies are different from each

other. In case you have to remove the

wiper arm assemblies for any reason,

remember not to interchange the two

while fitting them back. Wrong fitment

may lead to windshield breakage.

9-29
112

EMERGENCY SERVICE

60G-74E

WARNING TRIANGLE (TYPE-1)

If the temperature indication does not come

down to within the normal, acceptable range:

1) Turn off the engine and check that the

water pump belt and pulleys are not

damaged or slipping. If any abnormality is

found, correct it.

2) Check the coolant level in the reservoir. If

it is found to be lower than the "LOW" line,

look for leaks at the radiator, water pump,

and radiator and heater hoses. If you

locate any leaks that may have caused the

overheating, do not run the engine until

these problems have been corrected.

3) If you do not find a leak, carefully add

coolant to the reservoir and then the

radiator, if necessary. (Refer to "ENGINE

COOLANr in the "INSPECTION AND

MAINTENANCE" section.)
K is dangerous to remove the radiator

cap when the water temperature is

high, because scalding fluid and steam

may be blown out under pressure. The

cap should only be taken off when the

coolant temperature has lowered.

To help prevent personal Injury, keep

hands, tools and clothing away from the

engine cooling fan and airconditioner

fan (if equipped). These electric fans

can automatically turn on without

warning.
843-10-004

In case of vehicle break-down or during

emergency stopping where your vehicle could

become a potential traffic hazard, please keep

the warning triangle, provided with your

vehicle, on the pathway (road) behind the

vehicle so as to warn the approaching traffic,

at an approximate distance of 5-15 m, such

that reflecting side of the triangle faces the

rear. Please activate the hazard warning lamps

before alighting the vehicle to keep the warning

triangle.

10-5
120

60G-74E
EMERGENCY SERVICE

WARNING TRIANGLE (TYPE-2)

In case of vehicle breakdown or during

emergency stopping where your vehicle

could become a potential traffic hazard,

keep the warning triangle, provided with

your vehicle, on the road free from any

obstacles behind your vehicle so as to warn

the approaching traffic, at an approximate

distance of 50-100 m, the reflecting side of

the triangle should face the on coming

traffic. Please activate the hazard warning

lamps before alighting the vehicle to keep

the warning triangle.
Remove the warning triangle

carefully from the box as shown by arrow

1.

Open both the reflector arms as shown

by arrows and lock arms with each other

with the clip provided in the right arm.

Open the bottom stand in counter clock-

wise direction as shown by arrow 3.

Position the warning triangle behind the

vehicle on a plain surface.

Reverse the removal procedure

keeping inside the box.
for

121

10-6