1999 LEXUS SC300 service reset

GAUGES, METERS AND SERVICE REMINDER INDICATORS
53
This m
eter displays the odometer and two trip meters. To
change the mode indication, push the ºODO/TRIPº
button. E ach time you push the button, the mode changes
in order from the odometer to trip meter A to trip meter
B, then back to the odometer, etc.
The odometer records the total distance the vehicle has
been driven. The twin trip meter records two different
distances independently.
For example, you can use one meter to calculate the fuel
economy and the other to measure the distance on each trip.
To set the A trip meter to zero, display the A meter
reading, then push the ºRESETº button. The same
applies for the B trip meter.
The data of trip meters will be cancelled if the electrical power
source is disconnected.
SERVICE REMINDER
INDICATORS AND WARNING BUZZERS
IF THIS INDICATOR
OR BUZZER COMES
ON ... DO THIS.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
62
To change the mode, push the ºMODE/RESETº button
briefly at the right bottom of the instrument cluster.
The initial mode with the ignition switch turned to ºONº is an
outside temperature display.(1) Outside temperature(Figures with º Fº)
The displayed temperature ranges from ±30 C (±22F)
up to 50C (122F).
If the temperature does not appear on the display or it shows

GAUGES, METERS AND SERVICE REMINDER INDICATORS
63
º± ±º, take your vehicle to your Lexus dealer.
(2) Driving time
(Figures with ºE/Tº)
The total time during the engine running is displayed.
When the engine is started again after the ignition is off, the
driving time is added to the previous value. Up to 99 hours
59 minutes can be displayed. When the driving time exceeds
99 hours 59 minutes, the display returns to 0 and recounting
starts.
To count from the beginning, push the ºMODE/RESETº
button for more than 1 second.
(3) Average vehicle speed(Figures with ºAVG MPHº)
The average vehicle speed is calculated and displayed
based on the total driving distance and the total driving
time with the engine running.
The displayed value is updated every 10 seconds.
To calculate from the beginning, push the ºMODE/RESETº
button for more than 1 second.
(4) Average fuel consumption(Figures with ºAVG MPGº)
The average fuel consumption is calculated and displayed
based on the total driving distance and the total fuel
consumption with the engine running.
The value is updated every 10 seconds.
To calculate from the beginning, push the ºMODE/RESETº
button for more than 1 second.
(5) Momentary fuel consumption(Figures with ºMPGº)
The momentary fuel consumption is calculated and
displayed based on the driving distance and the fuel
consumption for 3 seconds with the engine running.
The value is updated every 3 seconds.
If you are driving at low speeds just before stopping, the
accurate figure may not be shown.
For the display (1), (3), (4) or (5), º± ±º will appear\
in case
the data for calculation is not appropriate.

ELECTRICAL COMPONENTS
378
No.FUSEAMPERECIRCUIT
11RADIONO.27.5Radio, cassette tape player,
compact disc player, power
antenna, power rear view mirrors
12TAIL7.5Tail lights, parking lights, side
marker lights, license plate lights
13ECU±IG15
Cruise control system, power
steering control system, shift lock
system, anti±lock brake system,
SRS airbag system, power door
lock system, preset steering system,
traction control system,
electronically controlled
hydraulic±driven cooling system,
passenger 's seat control system
14GAUGE10
Gauges and meters, service
reminder indicators and warning
buzzers (except discharge and open
door warning lights), back±up
lights, electronically controlled
automatic transmission system,
automatic transmission overdrive
system, headlight
15ECU±B15SRS airbag system, power rear
view mirrors
16OBD7.5On±board diagnosis system
17FOG15Fog lights
18SEAT±HT R15Seat heater