Page 62 of 432
SWITCHES
44
CAUTION
To avoid serious personal injury, you must do the following.
Always make sure the head, hands and other parts of the
body of all occupants are kept completely inside the vehicle
before you close the power windows. If someone's neck,
head or hands gets caught in a closing window, it could
result in a serious injury. When anyone closes the power
windows, be sure that they operate the windows safely.
When small children are in the vehicle, never let
them use the power window switches without
supervision. Use the ºWINDOW LOCKº switch to
prevent them from making unexpected use of the
switches.
Never leave small children alone in the vehicle,
especially with the ignition key still inserted. They
could use the power window switches and get
trapped in a window. Unattended children can
become involved in serious accidents.EMERGENCY FLASHER
SWITCH
Page 136 of 432

COMFORT ADJUSTMENT
118
Adjust the seat as needed and sit up straight and well back
in the seat. To fasten your belt, pull it out of the r etractor
and insert the tab into the buckle.
You will hear a click when the tab locks into the buckle.
The seat belt length automatically adjusts to your size and the
seat position.
The retractor will lock the belt during a sudden stop or on
impact. It also may lock if you lean forward too quickly. A
slow, easy motion will allow the belt to extend, and you can
move around freely. When a passenger's shoulder
belt is completely extended and
is then retracted even slightly, the belt is locked in that
position and cannot be extended. This feature is used to hold
the child restraint system securely. (For details, see ºChild
restraintº on page 143.) To free the belt again, fully retract the
belt and then pull the belt out once more.
If the seat belt cannot be pulled out of the retractor, firmly pull
the belt and release it. You will then be able to smoothly pull
the belt out of the retractor.
Page 137 of 432
COMFORT ADJUSTMENT
119
CAUTION
After inserting the tab, make sure the tab and buckle are
locked and that the belt is not twisted.
Do not insert coins, clips, etc. in the buckle as this may
prevent you from properly latching the tab and buckle.
If the seat belt does not function normally, immediately
contact your Lexus dealer. Do not use the seat until the seat
belt is fixed. It cannot protect an adult occupant or your
child from injury.
Adjust the position of the lap and shoulder belts.
Position the lap belt as low as possible on your hips ± not on
your waist, then adjust it to a snug fit by pulling the shoulder
portion upward through the latch plate.
Page 139 of 432

COMFORT ADJUSTMENT
121
Rear seat belts
Sit up straight and well back in the seat. To fasten your
belt, pull it out of the retractor and insert the tab into the
buckle.
You will hear a click when the tab locks into the buckle.
The seat belt length automatically adjusts to your size.
The retractor will lock the belt during a sudden stop or on
impact. It also may lock if you lean forward too quickly. A
slow, easy motion will allow the belt to extend, and you can
move around freely. When a shoulder belt is completely
extended and is then retracted even slightly, the belt is locked
in that position and cannot be extended. This feature is used
to hold the child restraint system securely. (For details, see
ºChild restraintº on page 143.)
To free the belt again, fully retract the belt and then pull the
belt out once more.If the seat belt cannot be pulled out of the retractor, firmly pull
the belt and release it. You will then be able to smoothly pull
the belt out of the retractor.
Page 140 of 432
COMFORT ADJUSTMENT
122
CAUTION
After inserting the tab, make sure the tab and buckle are
locked and that the belt is not twisted.
Do not insert coins, clips, etc. in the buckle as this may
prevent you from properly latching the tab and buckle.
If the seat belt does not function normally, immediately
contact your Lexus dealer. Do not use the seat until the seat
belt is fixed. It cannot protect an adult occupant or your
child from injury.
This vehicle is equipped with two seat belts in the rear seat.
For the safety of passengers, do not let three people ride in
the rear seat.
Page 143 of 432

COMFORT ADJUSTMENT
125
To connect the extender to the seat belt, insert the tab into
the seat belt buckle so that the ºPRESSº signs on the
buckle r
elease buttons of the extender and the seat belt are
both facing outward as shown.
You will hear a click when the tab locks into the buckle.
When releasing the seat belt, press on the buckle release
button on the extender, not on the seat belt. This helps prevent
damage to the vehicle interior and extender itself.
When not in use, remove the extender and store in the vehicle
for future use.
CAUTION
After inserting the tab, make sure the tab and buckle are
locked and that the seat belt extender is not twisted.
Do not insert coins, clips, etc. in the buckle as this
may prevent you from properly latching the tab and
buckle.
If the seat belt does not function normally,
immediately contact your Lexus dealer. Do not use
the seat until the seat belt is fixed. It cannot protect
an adult occupant or your child from injury.Front seat belt pretensioners
Page 169 of 432
COMFORT ADJUSTMENT
151
Do not put a r ear±facing child restraint system in the
rear seat if it interferes with the lock mechanism of
the front seats. This may cause serious injury to the
child and front passenger in case of sudden braking
or a collision.
Page 171 of 432
COMFORT ADJUSTMENT
153
CAUTION
After inserting the tab, make sure the tab and buckle are
locked and that the lap and shoulder portions of the belt are
not twisted.
Do not insert coins, clips, etc. in the buckle as this may
prevent you from properly latching the tab and buckle.
If the seat belt does not function normally, immediately
contact your Lexus dealer. Do not use the seat until the seat
belt is fixed. It cannot protect your child from injury.
2. Fully extend the shoulder belt to put it in the lock mode.
When the belt is then retracted even slightly, it cannot be
extended.
To hold the infant seat securely, make sure the belt is in the
lock mode before letting the belt retract.