Page 402 of 432
ELECTRICAL COMPONENTS
384The fluid (electrolyte) level must be between the upper
and lower lines.
When checking
the fluid level, look at all six cells, not just one
or two.
If the level is lower than the lower line, add distilled water.
(See ºAdding distilled waterº on page 386.) (b) Checking by the hydrometer
Page 406 of 432
ELECTRICAL COMPONENTS
388
NOTICE
Never recharge the battery while the engine is running.
Also, make sure all accessories are turned off.
CHECKING AND REPLACINGTHE BLADE TYPE FUSES
Page 411 of 432
ELECTRICAL COMPONENTS
393
CHECKING THE CARTRIDGETYPE FUSES
Page 414 of 432
ELECTRICAL COMPONENTS
396
ADDING WASHER FLUID
If the washer tank becomes nearly empty, add washer
fluid.
You may use plain water as washer fluid. However, in cold
areas where temperatures range below the freezing point, use
washer fluid containing antifreeze. This product is available
at your Lexus dealer and most auto parts stores. Follow the
manufacturer 's directions for how much to mix with water.
NOTICE
Do not use engine antifreeze or any other substitute
because it may damage your vehicle's paint.
CHECKING THE HEADLIGHTAIM
(For low beam only)
Page 415 of 432
ELECTRICAL COMPONENTS
397
Before checking the headlight aim:
1. Be sure that the body around the headlight is not deformed.
2. Park the vehicle on a level spot.
3. The driver should stay in the driver's seat so that the
vehicle has its normal load (with the tank full).
4. Bounce the vehicle several times.
