SECTION 6 ± 2
378
SERVICE PROCEDURES AND
SPECIFICATIONS
Engine
Specifications (GS400) 379. . . . . . . . . . . . . . . . . . . . . . . .
Specifications (GS300) 383. . . . . . . . . . . . . . . . . . . . . . . .
Fuel387 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Facts about engine oil consumption389 . . . . . . . . . . . . .
Used engine oil391 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the engine oil level392 . . . . . . . . . . . . . . . . . . .
Checking the engine coolant level397 . . . . . . . . . . . . . . .
Spark plugs401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGINE
397
Oil identification marks
62L006±1
API Service SymbolILSAC Certification
Mark
Either or both API registered marks are added to some
oil containers to help you select the oil you should use.
The API Service Symbol is located anywhere on the
outside of the container.
The top portion of the label shows the oil quality by
API (American Petroleum Institute) designation such
as SJ. The center portion of the label shows the SAE
viscosity grade such as SAE 5W±30.
ºEnergy±Conservingº, shown in the lower portion,
indicates that the oil has fuel±saving capabilities.
The ILSAC (International Lubricant Standardization
and Approval Committee) Certification Mark is
displayed on the front of the container.
CHECKING THE ENGINE
COOLANT LEVEL
ENGINE
398
62G004±1
1Reservoir cap 2Upper line 3Lower line
Look at the see±through coolant reservoir when the
engine is cold. The coolant level is satisfactory if it
is between theºFULLº and ºLOWº lines on the
reservoir. If the level is low, add ethylene±glycol
type coolant for a proper corrosion protection of
aluminum components.
The coolant level in the reservoir will vary with engine
temperature. However, if the level is on or below the
ºLOWº line, add coolant. Bring the level up to the ºFULLº
line.
Always use ethylene±glycol type coolant for a proper
corrosion protection of aluminum components. See
information in the next column.If the coolant level drops within a short time after
replenishing, there may be a leak in the system. Visually
check the radiator, hoses, engine coolant filler cap,
radiator cap and drain cock and water pump.
If you can find no leak, have your Lexus dealer test the
cap pressure and check for leaks in the cooling system.
