1999 Lexus GS300 Comfort Adjustment

COMFORT ADJUSTMENT
126
Power rear view mirror control
16L017-1

1Master switch 2Control switch
To adjust the power rear view mirror, first place the
master switch at ºLº (left) or ºRº (right), and push
the control switch on the desired side.
The power rear view mirror can be adjusted when the
key is in the ºACCº or ºONº position.NOTICE
If ice should jam the mirror, do not operate the
control or scrape the mirror face. Use a spray
de±icer to free the mirror.
Folding rear view mirrors

COMFORT ADJUSTMENT
127
16G014
To fold the rear view mirror, push backward.
The rear view mirrors can be folded backward for
parking in restricted areas.
CAUTION
Do not drive with the mirrors folded backward. Both the
driver and passenger side rear view mirrors must be
extended and properly adjusted before driving.

COMFORT ADJUSTMENT
128
INSIDE REAR VIEW MIRROR
16G015a

COMFORT ADJUSTMENT
129 Adjust the mirror so that you can just see the rear of
your vehicle in the mirror.
Pushing the switch changes the mode between
ºAUTOº and ºDAYº.
The indicator comes on when the ºAUTOº mode is
selected.
ºDAYº mode: The mirror surface is normal.
ºAUTOº mode: If the mirror detects light from the
headlights of the vehicle behind you, the mirror
surface darkens slightly to reduce the reflected
light.
When the inside rear view mirror surface changes, the
outside rear view mirror surfaces will also become
darker.
When the ignition key is inserted and turned on, the
inside rear view mirror always turns on in the ºAUTOº
mode.When the outside air temperature is low, it may take a
little longer for the mirror to darken in response to the
detection of headlights.
CAUTION
Do not adjust the mirror while the vehicle is moving. It
may cause the driver to mishandle the vehicle and an
accident may occur resulting in personal injuries.

COMFORT ADJUSTMENT
130
SEAT BELTS
Seat belt precautions
Lexus strongly urges that the driver and passengers in
the vehicle be properly restrained at all times with the
seat belts provided. Failure to do so could increase the
chance of injury and/or the severity of injury in accidents.
Child. Use a child restraint system appropriate for the
child until the child becomes large enough to properly
wear the vehicle's seat belts. See ºChild restraintº for
details.
If a child is too large for a child restraint system, the child
should sit in the rear seat and must be restrained using
the vehicle's seat belt. According to accident statistics,
the child is safer when properly restrained in the rear
seat than in the front seat.
If a child must sit in the front seat, the seat belts should
be worn properly. Do not let the child sit on your lap. It
does not provide sufficient restraint. If an accident
occurs and the seat belts are not worn properly, the force
of the rapid inflation of the airbag may cause severe
injury to the child.
Do not allow the child to stand up or kneel on either rear
or front seats. An unrestrained child could suffer serious
injury during emergency braking or a collision.
Pregnant woman. Lexus recommends the use of a
seat belt. Ask your doctor for specificrecommendations. The lap belt should be worn securely
and as low as possible over the hips and not on the waist.

COMFORT ADJUSTMENT
131 Injured person. Lexus recommends the use of a seat
belt. Depending on the injury, first check with your doctor
for specific recommendations.
CAUTION
Persons should ride in their seats properly wearing
their seat belts whenever the vehicle is moving.
Otherwise, they are much more likely to suffer serious
bodily injury in the event of sudden braking or a
collision.
When using the seat belts, observe the following:
Use the belt for only one person at a time. Do not use
a single belt for two or more people ± even children.
Avoid reclining the seatbacks too much. The seat
belts provide maximum protection when the
seatbacks are in the upright position. (See
ºAdjusting seatback angle.º)
Be careful not to damage the belt webbing or
hardware. Take care that they do not get caught or
pinched in the seat or doors.
Inspect the belt system periodically. Check for cuts,
fraying, and loose parts. Damaged parts should be
replaced. Do not disassemble or modify the system.

COMFORT ADJUSTMENT
132
Keep the belts clean and dry. If they need
cleaning, use a mild soap solution or lukewarm
water. Never use bleach, dye, or abrasive
cleaners ± they may severely weaken the belts.
(See ºCleaning the interiorº on page 471 for
instructions.)
Replace the belt assembly (including bolts) if it
has been used in a severe impact. The entire
assembly should be replaced even if damage is
not obvious.Fastening front and rear seat belts
16G016
Adjust the seat as needed and sit up straight and
well back in the seat. To fasten your belt, pull it out
of the retractor and insert the tab into the buckle.
You will hear a click when the tab locks into the buckle.
The seat belt length automatically adjusts to your size
and the seat position.

COMFORT ADJUSTMENT
133 The retractor will lock the belt during a sudden stop or on
impact. It also may lock if you lean forward too quickly.
A slow, easy motion will allow the belt to extend, and you
can move around freely.
When a passenger's shoulder belt is completely
extended and is then retracted even slightly, the belt is
locked in that position and cannot be extended. This
feature is used to hold the child restraint system
securely. (For details, see ºChild restraintº on page 165.)
To free the belt again, fully retract the belt and then pull
the belt out once more.
If the seat belt cannot be pulled out of the retractor, firmly
pull the belt and release it. You will then be able to
smoothly pull the belt out of the retractor.