1999 LAND ROVER DEFENDER wheel alignment

10 - MAINTENANCE
CONTENTS
Page
MAINTENANCE
UNDERBONNET VIEW - Td5 1..............................................................................
SEATS AND SEAT BELTS 2..................................................................................
LAMPS, HORNS AND WARNING INDICATORS 2................................................
WIPERS AND WASHERS 3...................................................................................
HANDBRAKE 3.......................................................................................................
BATTERY CONDITION - Td5 4..............................................................................
HANDSET BATTERY 5...........................................................................................
HEADLAMP ALIGNMENT 5....................................................................................
ROAD WHEELS 6...................................................................................................
TYRE PRESSURES, CONDITION AND TREAD DEPTH 6....................................
BRAKE PADS, CALIPERS AND DISCS 7..............................................................
ROAD WHEEL SPEED SENSOR HARNESS - Td5 7............................................
FUEL FILTER ELEMENT 8.....................................................................................
FUEL FILTER SEDIMENTER - Td5 8.....................................................................
INTERCOOLER / COOLING SYSTEM 9................................................................
AMBIENT AIR PRESSURE (AAP) SENSOR - Td5 9..............................................
DOOR LOCKS AND HINGES 10............................................................................
ENGINE COOLANT 10...........................................................................................
BRAKE FLUID 11....................................................................................................
AIR FILTER ELEMENT AND DUMP VALVE 11.....................................................
AUXILIARY DRIVE BELT 12...................................................................................
PAS FLUID, CLUTCH FLUID AND SCREEN WASHER LEVELS 12.....................
STEERING BOX 13................................................................................................
ENGINE OIL 14.......................................................................................................
CENTRIFUGE ROTOR - Td5 14.............................................................................
FULL FLOW OIL FILTER 15...................................................................................
GEARBOX OIL 15...................................................................................................
TRANSFER BOX OIL 16.........................................................................................
FRONT AND REAR AXLE OIL 17..........................................................................
PROPELLER SHAFTS 18.......................................................................................
CLUTCH PIPES AND UNIONS 18..........................................................................
PAS PIPES AND UNIONS 19.................................................................................
ENGINE, GEARBOX, TRANSFER BOX AND AXLES 19.......................................
EXHAUST SYSTEM 20...........................................................................................
STEERING BOX AND SUSPENSION 20...............................................................
STEERING BALL JOINTS 21.................................................................................
SHOCK ABSORBERS 22.......................................................................................
TOWING BRACKET 22...........................................................................................
ENGINE AND TRANSMISSION MOUNTINGS 23..................................................
ProCarManuals.com

CLUTCH
1
REPAIR CLUTCH ASSEMBLY
Service repair no - 33.10.01.01
Remove
1.Remove gearbox assembly.See MANUAL
GEARBOX, Repair.
2.Restrain flywheel.
3.Working in sequence, loosen 6 nuts securing
clutch cover to flywheel.
4.Remove clutch cover and clutch plate.
Refit
5.Clean clutch cover and flywheel mating faces
and spigot bush in end of crankshaft.
6.Position clutch drive plate to flywheel with
’gearbox side’ facing towards gearbox.
7.PositionLRT-12-152alignment tool through
drive plate into spigot bearing in crankshaft.8.Fit clutch cover and locate on dowels.
9.Position clutch cover nuts and tighten in diagonal
sequence to25 Nm (18 lbf.ft).
10.Fit gearbox assembly.See MANUAL
GEARBOX, Repair.
ProCarManuals.com

51REAR AXLE AND FINAL DRIVE
2
OVERHAUL
CAUTION: To prevent permanent damage
to the gear carrier case, it must not be
over-stretched. Each flat on the turnbuckle
is numbered to enable a check to be made on the
amount turned. The maximum stretch permitted is
0,30 mm, equivalent to three flats.
15.Ease off adjuster and remove spreader.
Using axle compressor LRT-51-503
16.Place tool on to differential casing, as illustrated,
with weld seam uppermost. Ensure that plates
rest squarely on differential machined surface
and end bars butt against edges of casing.
17.Tighten adjusting nuts by hand only, until all
slack is taken up.
18.Continue to tighten both nuts alternately with a
spanner, one flat at a time, to a maximum of
three flats.
19.Carefully lever-out differential assembly.
Dismantle differential
20.Add alignment marks between crown wheel and
differential case for reassembly purposes, then
remove fixings and withdraw crown wheel.
21.Note alignment markings on two differential
casings to ensure correct refitting, then remove
fixings.
22.Lift off upper case.
23.Withdraw upper differential wheel and thrust
washer.
24.Lift out cross-shaft and pinions.
ProCarManuals.com

77 - PANEL REPAIRS
CONTENTS
Page
INFORMATION
BODY REPAIRS 1..................................................................................................
ELECTRONIC CONTROL UNITS (ECU’s) 3..........................................................
BODY DIMENSIONS
CHASSIS AND BODY 1..........................................................................................
CHASSIS FRAME ALIGNMENT 2..........................................................................
GAP AND PROFILE INFORMATION 9...................................................................
SEALING AND CORROSION PROTECTION
APPROVED MATERIALS 1....................................................................................
APPLICATION EQUIPMENT 4...............................................................................
CORROSION PROTECTION 8...............................................................................
CAVITY WAX 12.....................................................................................................
SEALANTS AND ADHESIVES 17..........................................................................
WATER LEAKS 28..................................................................................................
PANELS
SERVICEABLE PANELS 1.....................................................................................
PROCEDURES
GENERAL WELDING PRECAUTIONS 1...............................................................
PANEL REPLACEMENT PROCEDURE 2..............................................................
REPAIR PROCEDURES 6......................................................................................
REPAIR
WING LOWER FRONT 1........................................................................................
HEADLAMP MOUNTING PANEL 1........................................................................
WING UPPER - LH 2..............................................................................................
WING UPPER - RH 2..............................................................................................
WHEEL ARCH - FRONT 3......................................................................................
BULKHEAD ASSEMBLY 3......................................................................................
SCREEN APERTURE 4..........................................................................................
SILL - FRONT 5......................................................................................................
’B/C’&’D’POST 5..................................................................................................
CORNER CAPPING 6.............................................................................................
BODY SIDE CAPPING 6.........................................................................................
ProCarManuals.com

77PANEL REPAIRS
4
BODY DIMENSIONS LAND ROVER 90
CHASSIS ALIGNMENT DIMENSIONS
A - Front Datum
B - Chassis Datum
C - Front axle centre line
D - Rear axle centre line
1.239,0 - 236,5 mm
2.82,0 - 79,5 mm
3.633 mm
4.2420,6 - 2418,6 mm
5.2306,4 - 2305,4 mm
6.981,2 - 978,7 mm
7.182,7 mm
8.41,5 - 37,0 mm
9.252 - 250 mm10.110 mm
11.2360mm - Wheelbase
12.636 - 634 mm
13.488 - 482 mm
14.488 - 482 mm
15.3431,1 - 3426,1 mm
16.588,3 - 586,3 mm
17.2313,8 - 2311,8 mm
18.590,5 mm
19.295,25 mm
20.519,30 - 517,30 mm
21.259,80 - 258,50 mm
22.1242,6 - 1240,6 mm
23.642,5 - 639,5 mm24.750,9 mm
25.439,5 - 436,5 mm
26.136,5 mm
27.299,5 - 295,5 mm
28.103 - 100 mm
29.131,5 - 126,5 mm
30.705,5 - 704,5 mm
31.705,5 - 704,5 mm
32.42,2 - 40,2 mm
33.491 - 486 mm
34.594,2 - 593,4 mm
35.283,0 - 282,2 mm
36.32,25 - 31,25 mm
37.397 - 395 mm
Engine mounting dimensions - section V-V
Section V-V, Tdi and Td5 engine mounting bracket dimensions. The dimensions are applicable to all derivatives.
Tdidimensions:
A = 276.5
B = 553
C = 127.9
D = 317.4
E = 4 degreesTd5dimensions:
A = 273.2
B = 546.5
C = 187.8
D = 374.3
E = 4 degrees
ProCarManuals.com

77PANEL REPAIRS
6
BODY DIMENSIONS LAND ROVER 110
CHASSIS ALIGNMENT DIMENSIONS
A - Front Datum
B - Chassis Datum
C - Front axle centre line
D - Rear axle centre line
1.4148 - 4143 mm
2.4009,5 - 4005 mm
3.978,7 - 981,2 mm
4.22 - 20 mm
5.252 - 250 mm
6.239 - 236,5 mm
7.3023,3 - 3022,3 mm
8.3030,7 - 3028,7 mm
9.155 - 153 mm
10.871,2 - 869,2 mm
11.2794 mm - Wheelbase
12.488 - 482 mm13.488 - 482 mm
14.82 - 79,5 mm
15.750,9 mm
16.750,9 mm
17.440,5 - 435,5 mm
18.440,5 - 435,5 mm
19.299,5 - 295,5 mm
20.500 - 495 mm
21.500 - 495 mm
22.594,2 - 593,4 mm
23.594,2 - 593,4 mm
24.283 - 282,2 mm
25.283 - 282,2 mm
26.1970 - 1968 mm
27.642,9 - 639,5 mm
28.750,9 mm29.290,5 mm
30.295,5 mm
31.299,5 - 295,5 mm
32.103 - 100 mm
33.1177,5 - 1175,5 mm
34.1692,5 - 1689,5 mm
35.2610 - 2606 mm
36.2040,5 - 2037,5 mm
37.1912,5 - 1909,5 mm
38.1359 - 1357 mm
39.1573 - 1571 mm
40.270 - 268 mm
41.665,5 - 663,5 mm
42.440 - 438 mm
43.32,25 - 31,25 mm
Section V-V is through the engine mountings. Dimensional information for the mountings can be found in Land
Rover’90’engine mounting dimensions.
ProCarManuals.com

77PANEL REPAIRS
8
BODY DIMENSIONS LAND ROVER 130
CHASSIS ALIGNMENT DIMENSIONS
A - Front Datum
B - Chassis Datum
C - Front axle centre line
D - Rear axle centre line
E - Chassis Datum, section A - A
1.633,0 mm reference only
2.3569,3 - 3567,3 mm
3.2421,8 - 2419,8 mm
4.2317,5 - 2314,5 mm
5.2188,3 - 2185,3 mm
6.2119,5 - 2117,3 mm7.1990 - 1988 mm
8.1970 - 1968 mm
9.2401,8 - 2399,8 mm
10.110,0 mm reference
11.149,7 - 146,7 mm reference dimension
12.3225.8 mm - Wheelbase
NOTE: The above dimensions are for the Land Rover 130 chassis frame. For additional
measurements, refer to the Land Rover 110 chassis frame drawing and aligment dimensions.
ProCarManuals.com