1999 LAND ROVER DEFENDER dimensions

77PANEL REPAIRS
8
BODY DIMENSIONS LAND ROVER 130
CHASSIS ALIGNMENT DIMENSIONS
A - Front Datum
B - Chassis Datum
C - Front axle centre line
D - Rear axle centre line
E - Chassis Datum, section A - A
1.633,0 mm reference only
2.3569,3 - 3567,3 mm
3.2421,8 - 2419,8 mm
4.2317,5 - 2314,5 mm
5.2188,3 - 2185,3 mm
6.2119,5 - 2117,3 mm7.1990 - 1988 mm
8.1970 - 1968 mm
9.2401,8 - 2399,8 mm
10.110,0 mm reference
11.149,7 - 146,7 mm reference dimension
12.3225.8 mm - Wheelbase
NOTE: The above dimensions are for the Land Rover 130 chassis frame. For additional
measurements, refer to the Land Rover 110 chassis frame drawing and aligment dimensions.
ProCarManuals.com

PANEL REPAIRS
9
BODY DIMENSIONS GAP AND PROFILE INFORMATION
The following information is to be used as a guide to assist the technician in refitting exterior body panels and trim
items, to achieve a correctly aligned and cosmetically acceptable vehicle.
Section A-A, Bonnet to wing, gap A = 3 - 8 mm. To be parallel within 2 mm.
Section B-B, Wing to’A’post lower, gap B = 0. Profile = +/- 1 mm.
Section C-C, Wing to sill, gap C = 0. Profile = +/- 1 mm.
Section D-D, Screen aperture to door frame, gap D = 5 - 9 mm.
Section E-E, Door frame to roof, gap E = 7 - 11 mm.
Section F-F, Front and rear door to’B/C’post, gap F = 7 - 11 mm.
ProCarManuals.com

77PANEL REPAIRS
10
BODY DIMENSIONS
Section G-G, Door to sill, gap G = 7 - 11 mm. Door profile to sill = 0 to + 2 mm.
Section H-H, Rear door to body, gap H = 7 - 11 mm. Door profile to body = 0 to + 3 mm.
Section J-J, Body side lower to body, gap J = 0 - 4 mm. To be parallel within 2 mm.
ProCarManuals.com

PANEL REPAIRS
11
BODY DIMENSIONS
Section K-K, Roof to taildoor, gap K = 7 - 9 mm. Profile = +/- 1 mm.
Section L-L, N-N, Body side to taildoor, gap L = 5 - 7 mm. Profile = +/- 1 mm.
Section M-M, Body rear to taildoor, gap M = 7 - 9 mm.
ProCarManuals.com

77PANEL REPAIRS
12
BODY DIMENSIONS
ProCarManuals.com