Front Axle Fluid (4x4)
\
\
\
\
\
\
\
Engine Air Cleaner & Air Pump Filters
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
Wheel Bearing All High Temperature Multi-
Grease -Purporse EP Grease
\
\
\
\
\
\
\
Automatic All ATF+2 Type 7176
Transmission
Fluid
\
\
\
\
\
\
\
Rear Axle All Mopar Hypoid Lubricant
Lubricant SAE 80W-90
(
2) GL-5 Gear Lube
\
\
\
\
\
\
\
4x4 Front All Mopar Hypoid Lubricant
Axle SAE 80W-90
Lubricant GL-5 Gear Lube
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
(
2) - Axles with Limited-Slip Differentials require the use of
a 5% Friction Modifier, such as Mopar Gear Oil Additive
Friction Modifier.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
Drain & Refill .............................. (3) 1.5 Qts. (1.4L)
Dry Refill ....................... ( 4) 10.0-11.5 Qts. (9.5-10.8L)
Manual Transmission ( 5)
AX 15 (SAE 75W-90/API GL-5) 2.5L & 3.9L .......... 3.3 Qts. (3.1L\
)
NV 3500 (Mopar M/T Lube, P/N 4761526) 5.2L ....... 2.1 Qts. (2.0L\
)
Front Differential (SAE 80W-90/API GL-5) ........... 3.0 Pts. (1.4L\
)
Rear Differential (SAE 80W-90/API GL-5) ( 6)
8 1/4" Ring Gear ( 7) ............................. 4.4 Pts. (2.1L)
9 1/4" Ring Gear ( 7) ............................. 4.8 Pts. (2.3L)
Power Steering Fluid ( 8)
2WD ............................................... 1.7 Pts. (.8L)\
4WD .............................................. 2.5 Pts. (1.2L)\
Transfer Case (Mopar ATF Plus Type 7176) ........... 2.5 Pts. (1.2L\
)
( 1) - Approximate quantity listed.
( 2) - Use an API energy conserving engine oil that is certified for
gasoline engines.
( 3) - Add this amount of fluid. Start engine and shift transmission
through all gears and back to Neutral. Add additional fluid to
bring fluid level to the MIN mark on dipstick. Recheck fluid
level with transmission at normal operating temperature. Adjust
fluid level to MAX mark on dipstick. Approximate drain and
refill capacity is 4.0 qts. (3.8L).
( 4) - Quantity may vary by type of oil cooler and oil cooler lines.
( 5) - Verify type of transmission used before servicing. The AX 15
uses a flywheel housing bolted to the front of the transmission.
The NV 3500 uses a flywheel housing which is an integral part of
the transmission housing.
( 6) - Models with Trac-Lok limited slip differential must have 5 ozs.
(.15L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 7) - Rear differential may be identified by number of bolts on rear
cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9
1/4" ring gear has 12 bolts on rear cover.
( 8) - Use only Mopar power steering fluid. DO NOT use automatic
transmission fluid.
\
\
\
\
\
\
\
FLUID CAPACITIES (DURANGO) \
\
\
\
\
\
\
Application ( 1) Quantity
Crankcase (Includes Filter) ( 2)
3.9L ............................................. 4.0 Qts. (3.8L)\
5.2L & 5.9L ...................................... 5.0 Qts. (4.7L)\
Cooling System (Includes Heater)
3.9L ........................................... 14.0 Qts. (13.2L)\
5.2L & 5.9L .................................... 14.3 Qts. (13.5L)\
Automatic Transmission
(Mopar ATF Plus Type 7176)
Drain & Refill .............................. ( 3) 1.5 Qts. (1.4L)
Dry Refill ....................... ( 4) 10.0-11.5 Qts. (9.5-10.8L)
Front Differential
(SAE 80W-90/API GL-5) ............................. 3.0 Pts. (1.4L\
)
Rear Differential
(SAE 80W-90/API GL-5) ( 5)
8 1/4" Ring Gear ( 6) ............................ 4.4 Pts. (2.1L)
9 1/4" Ring Gear ( 6) ............................ 4.8 Pts. (2.3L)
Power Steering Fluid ( 7) ........................... 2.5 Pts. (1.2L)
Transfer Case (Mopar ATF Plus Type 7176) ( 8)
NV 231 & NV 231HD ................................ 2.5 Pts. (1.2L)\
NV 242 ........................................... 3.0 Pts. (1.4L)\
(SAE 90W/API GL-5 - 2500) (8) ................... 6.3 Pts. (3.0L)
Dana 70 (Model 267)
(SAE 90W/API GL-5 - 2500) ( 9) ................... 7.0 Pts. (3.3L)
Dana 80 (Model 286)
(SAE 85W-90/API GL-5) ( 10)
2WD 3500 ...................................... 6.8 Pts. (3.2L)\
4WD 3500 ..................................... 10.1 Pts. (4.8L)\
Power Steering Fluid ( 11) .......................... 2.7 Pts. (1.3L)
Power Take-Off (PTO) Adapter
(Mopar ATF Plus Type 7176)
2500 & 3500 Models 2WD With A/T .................. 4.6 Pts. (2.2L)\
Transfer Case (Mopar ATF Plus Type 7176) ( 12)
NV 231HD ......................................... 2.5 Pts. (1.2L)\
NV 241 ........................................... 5.0 Pts. (2.4L)\
NV 241HD ......................................... 6.5 Pts. (3.1L)\
NV 241HD With Power Take-Off (PTO) ............... 9.0 Pts. (4.3L\
)
( 1) - Approximate quantity listed.
( 2) - On gasoline engines, use an API energy conserving engine oil
that is certified for gasoline engines. On diesel engines, use
engine oil with API CF-4/SH or CG-4/SH rating for diesel
engines.
( 3) - Add this amount of fluid. Start engine and shift transmission
through all gears and back to Neutral. Add additional fluid to
bring fluid level to the MIN mark on dipstick. Recheck fluid
level with transmission at normal operating temperature. Adjust
fluid level to MAX mark on dipstick. Approximate drain and
refill capacity is 4.0 qts. (3.8L).
( 4) - Quantity may vary by type of oil cooler and oil cooler lines.
( 5) - Verify type of transmission used before servicing. The NV 3500
uses a flywheel housing which is an integral part of the
transmission housing. The NV 4500 uses a flywheel housing which
is bolted to the front of the transmission and transmission
contains a Power Take-Off (PTO) cover on passenger's side of
transmission.
( 6) - Heavy-duty transmission is used with 5.9L diesel and 8.0L.
( 7) - Models with Trac-Lok limited slip differential must have 5 ozs.
(.15L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 8) - Models with Trac-Lok limited slip differential must have 6 ozs.
(.18L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 9) - Models with Power-Lok limited slip differential must have 8 ozs.
(.24L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 10 ) - Models with Trac-Lok limited slip differential must have Mopar
Trac-Lok Friction Modifier added if lubricant is changed. Add
7 ozs. (.24L) of modifier on 2WD models or 10 ozs. (.30L) on
4WD models.
( 11 ) - Use only Mopar power steering fluid. DO NOT use automatic
transmission fluid.
( 12 ) - Transfer case may be identified by model number stamped on
identification tag on rear of transfer case, just above filler
plug.
\
\
\
\
\
\
\
FLUID CAPACITIES (RAM VAN & RAM WAGON) \
\
\
\
\
\
\
Application ( 1) Quantity
Crankcase (Includes Filter) ( 2)
3.9L ............................................. 4.0 Qts. (3.8L)\
5.2L & 5.9L ...................................... 5.0 Qts. (4.7L)\