1999 BMW X5 sunroof

TABLE OF CONTENTS
Subject Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Power Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Windshield Wiping/Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Optional Rain Sensor (AIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Central Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Remote RF Keyless Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Model Year 2000 FZV Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Car Memory / Key Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Power Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Window Anti-Trap Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Interior Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Anti-Theft (DWA) System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Tilt Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Interior Protection (UIS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Alarm Siren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Alarm Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Seat Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Mirror Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Seat Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Steering Column Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
General Functions of ZKE III . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Diagnosis/Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Revised 6-96

INTRODUCTION
The Central Body Electronics (ZKE III) equipped on the X5 includes the following sub-
systems under the total scope of its control:
• Windshield/tailgate wiping/washing,
including windshield rain sensor (AIC).
• Interior lighting
• Central locking
• Keyless entry
• Tailgate release
The following is an overview of new or changed features found on the X5 ZKE III variant.
• Passenger’s door module is now incorporated into the passenger’s door switchblock
module.
• Sunroof module (SHD) located on the K bus.
• The Central Locking system uses a new style door lock actuator with hall effect sensors
similar to E46.
• The GM III is responsible for the Key Memory feature. It provides the added
convenience of identifying users of the vehicle. Whenever the vehicle is locked or
unlocked via the FZV keyless entry system, a unique key identification signal (key
number) is transmitted to the General Module.
The key identification signal alerts the GM to communicate with other control systems
over the K Bus to store (when locked) or reset (when unlocked) certain driver adjustable
settings for the driver using the specific key. The GM also resets certain driver
adjustable settings that it controls directly.
• Power windows/Sunroof
• DWA alarm system
• Mirror - adjustment/memory/heating
• Seat adjustment/memory
• Steering column adjustment/memory
• Consumer cut-off/sleep mode
ZKE - 2

REMOTE RF (KEYLESS) ENTRY
The X5 keyless entry system’s operation is carried over from the E38/E39. However, the
FZV key has undergone considerable redesign.
• The remote key receiver is part of
the antenna amplifier and is
installed in the center of the top
section of the tailgate.
The receiver produces a digital
signal based on the transmitter
command and sends it to the GM
for processing.
The GM then carries out all remote
lock system, window/sunroof
convenience closing features and
DWA arming/disarming functions.
• The frequency at which the key transmits the radio signal to the antenna amplifier is 315
MHz.
• The system is also used to convey the key identification number being used to
lock/unlock the vehicle. This is a requirement of the Key Memory feature covered further
on in this manual.
GM III
ZKE - 23
GM III

MODEL YEAR 2000 FZV KEY
Visual Changes:
• New appearance with blue and white BMW roundel.
• New button arrangement (larger buttons) with sequential operation (enhanced operating
convenience)
• Rechargeable battery replaces replaceable batteries. Charged by EWS ring antenna.
• The key housing is encapsulated and can not be opened.
• The LED has been omitted.
• Key will be used in E46, E38 and E39 vehicles.
Features of the keyless entry system include:
• Up to 4 radio-control keys can be operated in conjunction with one vehicle.
• Locking/unlocking of doors, tailgate,
fuel filler lid.
• Selective unlocking of driver’s door (as
with key in lock)
• Arming/dis-arming of DWA alarm system
(if equipped).
• Remote unlocking of the tailgate only.
• Comfort opening of windows and
sunroof
• Interior lighting activation (search mode).
• Panic mode alarm activation..
• Automatic correction for up to 1000
erroneous activation signals.
• Low transmitter battery fault code
storage in the GM.
• An EEPROM is used to store the key
data.
• Keys delivered with a four color label
sheet containing four different colored
labels for each of the four possible FZV
keys.
ZKE - 24TAILGATE OPENS

ZKE - 39
WINDOW ANTI-TRAP DETECTION
The window anti-trap detection feature is only active in the one touch and convenience
close modes of operation. If the window switch is pushed/pulled and held, the Anti-trap
feature will not function.
The rubber pressure guard located at the top
edge of each door frame consists of two contact
strips that close when subjected to pressure.
This provides anti-trap detection and signal
generation to the GM.
When the contact strip closes, the window
immediately (10ms) reverses direction as with
previous anti-trap systems. The contact strip
does not require that the anti-trap feature be
initialized prior to operation.
The pressure sensor finger guard has a
resistance of 3.0 KOhm and it is monitored for
open circuit. When pressed, the monitored
resistance changes to <1KOhm. Faults with the
anti-trap system require that the window switch
be held to close the window.
CONVENIENCE OPENING/CLOSING
The GM and Front Door Switchblock Modules provide the convenience open/close feature
providing control of the power windows (and sunroof) from outside the vehicle with the key
in the driver’s door lock. The FZV provides the same function for the opening only.
• The anti-trap feature is active during convenience closing from the driver’s door lock.
• The convenience open feature provides outside activation of the windows and sunroof
in the same manner.
• If the GM receives a request to operate convenience close or open for more than 110
seconds, the function is deactivated and a fault code is stored.
• The Car Memory Feature can activate and deactivate the Convenience Open Feature
from the FZV’s control.

SUNROOF
The sunroof is mechanically similar to previous systems. All of the electronic controls and
relays are contained in the sunroof module (SHD). The module is connected to the K-Bus
for comfort closing/opening, unloader signalling during engine startup, diagnosis and fault
memory purposes
SUNROOF SWITCH
Mounted in the sunroof motor trim cover is the sunroof switch. Also similar to previous
systems, the switch provides coded ground signals for system operation.
The following switch signals are generated over three wires through coded combinations:
• Rest position
• Slide open request (press and hold switch - first
detent of open position)
• Automatic slide open request (press further to
second detent and release)
• Tilt open (press and hold)
• Slide close request (press and hold switch - first
detent of close direction)
• Automatic slide close request (press further to
second detent and release)
ZKE - 40
K BUS

ZKE - 41
SUNROOF MOTOR/MODULE (SHD)
The combined motor module has a 13 pin
connector for interfacing the switch, and
vehicle harness (power ground and K bus.)
The motor contains two hall effect sensors
that monitor the motor shaft rotation
providing sunroof panel position.
The hall sensors also provide the end limit cut
out function for the SHD once the system is
initialized. The SHD counts the pulses and
cuts the motor out prior to the detected end
run of the sunroof panel.
INITIALIZATION
Initialization is required for the SHD to learn the end positions of the motor's travel. The hall
sensors provide pulses for motor rotation, the SHD counts the pulses and determines
where the panel is by memorizing the stored pulses.
If the system is not initialized, the sunroof will only operate in the tilt up and slide close
positions. Initialize as follows:
• Press and hold the sunroof switch in either the tilt up or slide close positions for 15
seconds.
• The sunroof motor operate momentarily signifying initialization acceptance.
The SHD memorizes the pulses from the hall sensors on the next activation of the motor
by driving the panel to its end run positions. The SHD senses an amperage increase and
determines the end run position. The counted number of pulses is then used as the basis
for calculating the panel position.
ANTI TRAP FEATURE
The anti-trap feature of the sunroof uses a hall sensor to detect obstructions while the
sunroof is closing (pulse frequency slowed down) in the automatic close function. The anti-
trap feature is shut down prior to full closing (4mm from full closed) to allow the sunroof the
seat into the seal.
Additionally, the anti-trap feature is not functional when the switch is held in the manual
close position.

ZKE - 42
SHD SELF DIAGNOSIS
The SHD monitors its operation and stores fault codes if a defect is determined: The SHD
monitors the following conditions:
• SHD motor relays:The relays are checked for sticking contacts (plausibility) and non
functional contacts.
• Hall effect position sensors:The SHD must detect a pulse frequency from the hall
effect sensor(s) during operation.
• Sunroof Switch: The SHD monitors the signal plausibility of the coded signaling from
the sunroof switch.
SUNROOF FAULT RESPONSE CHARACTERISTICS
If a fault occurs with any of these functions, the SHD responds as follows:
• Overrides the end run detection.
• Switches the motor off if the relay contacts stick for more than 500 ms.
• Switches the motor off if pulses are not received.
EMERGENCY OPERATION OF SUNROOF
If the sunroof motor does not respond to the switch signals, the hex key in the trunk lid tool
kit is used to manually turn the motor shaft drive as on previous systems