Page 2 of 33
the oil dipstick. Damage to the Three Way
Catalytic Converter (TWC) could result.
Markings, refer to illustration Page 17
-27
.
Viscosity classes and oil specifications Page
17
-26
.
Pa
ge 2 of 33 Lubrication s
ystem com
ponents, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.17.1
Page 24 of 33
17-19
- Install subframe Repair Manual, Suspension,
Wheels, Steering,Repair Group 40.
- Place torque support on rubber buffer for torque
support and tighten bolts to 25 Nm (18 ft lb).
- Install ribbed belt Page 13
-15
.
Note:
When installing ribbed belt, check for correct
seating on belt pulley.
- Add engine oil and check oil level.
CAUTION!
Do not overfill with oil past the MAX mark on
the oil dipstick. Damage to the Three Way
Catalytic Converter (TWC) could result.
Pa
ge 24 of 33 Lubrication s
ystem com
ponents, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.17.1
Page 33 of 33
17-27
Oil level, checking
Test conditions
Minimum engine oil temperature: 60 C
(140 F)
Vehicle on level ground
After stopping engine, wait a few minutes to
allow oil to flow back into oil pan
- Withdraw dipstick, wipe off using clean cloth and
reinsert fully.
- Withdraw dipstick again and read oil level.
Range of markings on dipstick:
CAUTION!
Do not overfill with oil past the MAX mark on the oil dipstick.
Damage to the Three Way Catalytic Converter (TWC) could result. a - Oil MUST NOT be topped off.
b - Oil may be topped off. After topping off, oil may reach range -a-.
c - Oil MUST BE topped off. After topping off, it is sufficient if oil level is
somewhere in range -b- (shaded area).
Pa
ge 33 of 33 Lubrication s
ystem com
ponents, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.17.1
