34-70
- Fit relay lever -A- for reverse gear onto bolt for relay lever. Watch
position of pin when doing this (limits relay lever travel to synchro-ring).
- Insert sliding gear -B- and engage relay lever with groove on sliding
gear.
- Insert synchro-ring -C-.
Installation position: position flat on circumference of synchro-ring
towards input shaft (not as yet fitted) (arrow -1-)
- Insert spring.
Installation position: hook single angled end into recess on synchro-
ring (arrow -2-). Turn double angled end anti-clockwise and hook into
opening in bearing plate (arrow -3-)
Pa
ge 19 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, rem...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5
