42-106
Wheel bearing housing,
removing and installing
Removing
Vehicle must be standing on its wheels
above vehicle lift
WARNING!
The vehicle must be standing on its wheels when loosening or
tightening the collar bolt for the drive axle. Otherwise the risk of an
accident exists. - Remove wheel trim.
On light alloy wheels use puller in vehicle tool kit to remove trim cap
- Loosen collar bolt page 42
-94
, item - 7 -.
- Loosen wheel bolts.
- Raise vehicle on lift.
- Remove wheel.
- Pull ABS wheel speed sensor from wheel bearing housing.
- Remove collar bolt page 42
-94
, item - 7 -.
Pa
ge 1 of 13 Wheel bearin
g housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.8
