Page 4 of 14
48-29
10 -
Return hose
Between reservoir and cooling lineNot on 4-cyl. TDI without towing hitch
11 -
Clamps Use VAG1275 to tighten
12 -
Bolts 10 Nm (7 ft lb)
13 -
Cooling line Not on 4-cyl. TDI without towing hitch
14 -
Cable strap
15 -
Clamp Use VAG1275 to tighten
16 -
Suction hose
17 -
Clamp Use VAG1275 to tighten
18 -
Hose fitting 50 Nm (37 ft lb)
19 -
Seals 18 x 24 Always replace
Pa
ge 4 of 14 Power steerin
g pum
p, reservoir and h
ydraulic fluid circuit
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.7
Page 8 of 14
48-32
10 -
Return hose
Between expansion tank and oil cooler
11 -
Clamps Always replaceUse VAG1275 to tighten
12 -
Bolt w/washer assembly 10 Nm (7 ft lb)
13 -
Cooling line
14 -
Cable strap
15 -
Clamp Always replaceUse VAG1275 to tighten
16 -
Suction hose
17 -
Bolt w/washer assembly 8 Nm (71 in. lb)
18 -
Bracket Bolted to cylinder head
19 -
Clamp Always replaceUse VAG1275 to tighten
Pa
ge 8 of 14 Power steerin
g pum
p, reservoir and h
ydraulic fluid circuit
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.7
Page 12 of 14
48-35
CAUTION!
Mark the running direction before removing.
Reinstalling a used belt in reversed running
direction could damage the belt. 11 -
Return hose
Between reservoir and cooling line
12 -
Cable strap
13 -
Cooling line
14 -
Torx bolts (T-30) 9 Nm (80 in. lb)
15 -
Line Marks must align with mark on suction
hose
16 -
Nut 20 Nm (15 ft lb)For attaching pressure hose to cooling line
17 -
Suction hose Marking -P- faces pump
18 -
Ribbed belt Mark running direction before removing
Pa
ge 12 of 14 Power steerin
g pum
p, reservoir and h
ydraulic fluid circuit
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.7
