Page 1 of 8
27-40
Starter, removing and
installing
CAUTION!
Disconnect the battery Ground (GND) strap
before working on the electrical system.
Notes:
Before disconnecting the battery, determine the
correct coding for the anti-theft radio.
Once the battery is reconnected, check and
activate the vehicle's electrical equipment
(radio, clock, comfort and convenience
features, etc.) as described in this Repair
Manual or the Owners Manual.
Pa
ge 1 of 8 Starter, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.3
Page 2 of 8
27-41
Vehicles with 4-cylinder gasoline
engines
Removing
Vehicles with air conditioning
Repair Manual Body Exterior, Repair Group 63
Repair Manual Body Exterior, Repair Group 50 - Remove noise insulation panel (arrows).
- Remove front bumper.
- Move lock carrier into service position.
Pa
ge 2 of 8 Starter, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.3
Page 6 of 8
27-45
Vehicles with 6-cylinder gasoline
engines
Removing
Note:
To remove the starter, it is first necessary to
remove the generator Page 27
-26
.
2.7 L/184 kW engine, 5V twin-turbo only
All vehicles - Remove air duct -1-.
2 - Attachment point for oil and refrigerant lines
3 - Engine block mounting point
4 - Hose clamp (loosen)
- Disconnect wire from terminal 30/B+ -2- by removing nut. Tightening
torque: 16 Nm (12 ft lb)
- Disconnect harness connector from terminal 50 -2-.
Pa
ge 6 of 8 Starter, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.3