55-5
WARNING!
Clamp only in the area shown; otherwise there is a risk of an
accident!
Note:
Always wear eye protection when performing this procedure. Cover the
sawing area with a clean rag to contain any escaping fluid. Fig. 1 Releasing gas from strut
- Clamp gas-filled strut in vice area -x-.
Dimension -x-: 50 mm (2 in.)
- Using saw, cut into cylindrical part of strut at point within first third of
cylinder's length (measured from piston rod end of cylinder).
Pa
ge 5 of 11 Hoo
d
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.55.1
