72-9
VAS 5094 airbag adapter, connecting
WARNING!
Leave VAS 5094 airbag adapter on seat until
seat is again installed in vehicle. - Insert harness connector -2- ((VAS 5094 airbag
adapter) into connector housing -3-.
- Connect igniter wire -6- from airbag module (on
seat frame) to harness connector -1- (airbag
adapter).
- For seats with seat heaters, disconnect harness
connector.
- Turn down carpet in area near guide rail.
- Push seat back out of guide rail.
- Lift seat out of vehicle.
Pa
ge 9 of 23 Front seats
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.1
72-14
- For vehicles with seat heaters, disconnect
harness connector under seat and detach from
brackets.
Note:
It is not necessary to remove brake wheel -3- because it is part of the
backrest frame. - Remove bolts -1- (4x).
Tightening torque: 23 Nm (17 ft lb)
- Lift off backrest.
Pa
ge 14 of 23 Front seats11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.1
