87-181
Evaporator housing, assembly - Remove heater/air conditioner assembly
complete with instrument panel page 87
-159
.
- Heater/air conditioning assembly page 87
-
165
.
1 -
Intake duct
Removing and installing air flow flap
page 87
-183
Coat sealing surfaces of housing halves
with silicone rubber before assembling
2 -
Fresh/recirculating air flap vacuum unit Removing and installing page 87
-186
3 -
Top part of evaporator housing
4 -
Gasket
Glued into top part of evaporator housing
5 -
Evaporator
6 -
Retaining clip Carefully pry off with screwdriver
Pa
ge 1 of 3 Eva
porator housin
g, assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.25
87-183
Air flow flap, removing and installing
- Remove heater/air conditioner assembly
complete with instrument panel page 87-159
.
- Remove flap motor V71 for air flow flap:
1996 vehicles page 87
-146
.
1997 vehicles page 87
-147
.
Note:
Insert air flow flap correctly (longer side of air flow flap faces in direction of
travel and the teeth of the bearing face down). - Separate intake duct -A- from evaporator housing page 87
-181
.
- Press back both catches -B- and remove both bearings.
- Remove air flow flap -C-.
- Install in reverse order of removal.
Pa
ge 3 of 3 Eva
porator housin
g, assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.25
