01-320
Resistance measurement: Select measurement range on VAG1526 (200 ) Test
step VAG
1598/20
sockets Test of
Test
requirements
- Additional work
steps Specified
value Corrective action
6 52 + 54
High pressure switch
valve -1- traction control
-N227-
W
16
- Check electrical wiring for short
circuit to Ground (GND) or B+.
High pressure switch
valve -2- traction control
-N228- Electrical Wiring Diagrams,
Troubleshooting & Component
Locations
- If the electrical wiring is OK,
replace the hydraulic unit.
7
8 + 10
1)
9 + 10 2) Left front ABS wheel speed
sensor -G47-
400
2300
- An infinitely high resistance
indicates an open circuit. Check for
this.
Outlets on ABS control module -J104- differ depending on installed equipment
1) Vehicles with all-wheel-drive
Pa
ge 21 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16
01-321
Resistance measurement: Select measurement range on VAG1526 (2k or 20 k )
Test
step VAG
1598/20
sockets Test of
Test
requirements
- Additional work
steps Specified
value Corrective action
8 15 + 16 Right front ABS
wheel speed
sensor -G45-
- A resistance less than the specified value
indicates a short circuit between both lines.
Check for this.
9 13 + 14 Left rear ABS
wheel speed
sensor -G46-
400
2300
- Check electrical wiring for short circuit to
Ground (GND) or B+.
10 11 + 12 Right rear ABS
wheel speed
sensor -G44- Electrical Wiring Diagrams,
Troubleshooting & Component Locations - If the electrical wiring is OK, replace the
relevant ABS wheel speed sensor.
Pa
ge 23 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16
