17-2
Component layout
Modified oil circuit
CAUTION!
Do NOT overfill with oil past the MAX mark on
the oil dipstick. Damage to the three way
catalytic converter could result.
Note:
Always replace gaskets and seals
1 -
10 Nm (7ft lb)
2 -
10 Nm (7 ft lb)
3 -
Oil pan, upper
4 -
Pick-up strainer
Locks into upper oil pan with three lock
tabs
5 -
Gasket
Pa
ge 2 of 15 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.17.1
17-4
Oil pump, removing
Note:
If irregular valvetrain noises occur and disappear
after a lengthy drive, but always re-occur on
short drives, replace the oil retention valves.
- Remove oil dipstick and drain engine oil.
- Remove upper and lower parts of oil pan.
Note:
When installing the oil pump check alignment of oil pump drive
Tightening torques - Remove toothed belt page 13
-11
.
- Remove toothed-belt tensioner and guide pulley at oil pump.
- Remove screw plug.
- Remove oil pump.
Oil pump10 Nm (7 ft lb) Guide pulley20 Nm (15 ft lb)
30 Nm (22 ft lb)
Pa
ge 4 of 15 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.17.1
