1999 AUDI A4 AFC Engine Auxiliary Input Signals Checking Workshop Manual

24-108

- Switch ignition ON.

- Using VAG 1551 scan tool, select "Read
Measuring Value Block" function 08, display
group 027, display field 2 page 01
-249
.
Read measuring value block 27 1 2 3 4

Indicated on display; note display field 2
If the specified value is not obtained, even though coding is OK: Specified value: 0
- Start engine and let idle.
Specified value: 1
-
Press button.- Select "End Output" function 06.
- Press -Q- button to confirm input.
- Connect VAG 1598/19 test box to ECM harness connector page 01
-
255
.
- Check wiring for open or short circuit between ECM and instrument
cluster, using wiring diagram.
Pa
ge 33 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

24-109

Rough road condition signal, checking


ABS control module with ABS/EDL

Notes:

Misfires can result in malfunctions such as
"Combustion misfire" being recorded in DTC
memory due to road wheel malfunctions.
If the ABS control module recognizes a free
turning wheel, it generates a rough road signal.
If the Engine Control Module (ECM) recognizes
the rough road signal, misfire recognition is
switched off in the ECM.
The rough road signal is created to check
whether DTC 18014 "Rough Road Spec Engine
Torque ABS-SG Electrical Malfunction" is
stored in DTC memory. The "Combustion
misfire" malfunction results from this signal and
can be ignored.
The rough road signal is monitored by the
ECM.

Checking requirement

Pa
ge 34 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

Control module coding OK page 01
-247
.

Checking

- Switch ignition OFF.

- Connect VAG 1598/19 test box to ECM harness
connector page 01
-255
.

- Check signal wire for open or short circuit
between ECM and ABS control module, using
wiring diagram.
Pa
ge 35 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

24-110

- Find and eliminate open or short circuit; repair
as necessary.
If wiring is OK:

- Replace ABS control module.
If the ABS control module is OK, but the
malfunction is still occurring:

- Replace ECM page 01
-265
.

ABS control module with ABS/EDL/ASR

Notes:

The torque signal is monitored by the
"Automatic Traction Control" Control Module
and by the ECM.

Repair Manual, Brake System On Board
Diagnostic (OBD), Repair Group 01


Vehicles with automatic traction control (ASR)
can be recognized by the ASR indicator light in
the instrument cluster or by control module
identification displayed during the ABS On
Board Diagnostic program sequence.
Pa
ge 36 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

Repair Manual, Brake System On Board
Diagnostic (OBD), Repair Group 01


Checking requirement

Control module coding OK page 01
-247
.
Pa
ge 37 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25