00-14
Shims
Use a micrometer to measure the shims at
several points. Different tolerances make it
possible to obtain the exact shim thickness
required.
Check for burrs and signs of damage.
Sliding Gears
After assembling, check axial play of 1st to 5th
sliding gears (0.15-0.35 mm) and check for free
movement.
Synchronizer rings
Do not interchange. When re-using, install
synchronizer rings with the same gear with
which they were matched.
Check for signs of wear; replace if necessary.
Lubricate with transmission fluid before
installing.
Gears, synchro-hubs, inner races for sliding
gears
Pa
ge 8 of 10 General re
pair instructions
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.00.4
