39-142
WARNING!
Wear protective gloves. Fig. 7 Installing large tapered roller bearing inner race onto
pinion shaft
-
Heat bearing to approx. 100 C (212 F), install and press down.
Note:
The marking "Oben" on 3253/4 thrust piece faces the nut of the puller. Fig. 8 Installing large tapered roller bearing inner race onto
pinion shaft
- First insert predetermined shim S3 for pinion shaft Page 39
-149
.
Pa
ge 10 of 13 Pinion shaft, removin
g, installin
g and servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.16
39-143
Fig. 9 Installing small tapered roller bearing outer race
- Oil outer race, and position using VW408A punch and 30-205 thrust
pad.
WARNING!
Wear protective gloves. Fig. 10 Installing small tapered roller bearing inner race
- Insert pinion shaft with new spacer sleeve.
-
Heat small tapered roller bearing inner race to approx. 100 C (212 F)
and install onto pinion shaft. - Lift up pinion shaft and press bearing using 40-21 sleeve up to stop.
Pa
ge 11 of 13 Pinion shaft, removin
g, installin
g and servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.16
