39-82
Aligning driveshaft longitudinally
The center bearing must be aligned centrally between markings -A- and -
B-. - Push driveshaft with alignment fixture toward rear as far as possible.
- Mark position of center bearing on body (arrow -A-).
- Push driveshaft with alignment fixture toward front as far as possible.
- Mark position of center bearing on body (arrow -B-).
- Align driveshaft (arrow -C-).
- Install mounting bolts for center driveshaft bearing together with
previously selected shims, and tighten.
- Remove alignment fixture.
- Install heat shield above driveshaft.
Pa
ge 7 of 8 Drive flan
ge/driveshaft radial deviation, measurin
g and identif
ying
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.9
