1998 TOYOTA 4RUNNER air conditioning

4RUNNER (1998)
1. Clutch start cancel switch
2. Headlight and turn signal
switch
3. Wiper and washer switches
4. Back window defogger switch
5. Emergency flasher switch
6. Clock
7. Cup holder
8. Air conditioning controls
9. Car audio
10. Ashtray 11. Cigarette lighter
12. Ignition switch
13. Cruise control switch
14. Rear differential lock switch
15. Instrument panel light con- trol knob
16. Power rear view mirror con- trol switch (without power
windows)
17. Power back window lock switch (without power win-
dows)

4RUNNER (1998)
The gauge indicates the engine
coolant temperature when the igni-
tion switch is on. The engine oper-
ating temperature will vary with
changes in weather and engine
load.
If the needle moves into the red zone,
your engine is too hot. If your vehicle
overheats, stop your vehicle and allow
the engine to cool.
Your vehicle may overheat during se-
vere operating conditions, such as:
Driving up a long hill on a hot day.
Reducing speed or stopping after
high speed driving.
Idling for a long period with the air
conditioning on in stop- and- go traf-fic.
Towing a trailer
NOTICE
Do not remove the thermostat
in the engine cooling system asthis may cause the engine to
overheat. The thermostat is de-
signed to control the flow ofcoolant to keep the temperatureof the engine within the speci-
fied operating range.
Do not continue driving with anoverheated engine. See ºIf your
vehicle overheatsº in Part 4.
Tachometer

4RUNNER (1998)
Part 1
OPERATION OF
INSTRUMENTS
AND CONTROLSÐ
Chapter 1- 7
Car audio system
and Air conditioning system
Car audio system
Reference
Using your audio system:
some basics
Using your audio system:
controls and features
Car audio system operating
hints
Air conditioning system
Controls
Air flow selector settings
Operating tips
Instrument panel vents
Rear heater system Car audio systemÐ
ÐReference

4RUNNER (1998)
CARING FOR YOUR COMPACT DISC
PLAYER AND DISCS
Use only compact discs labeled as
shown.
Extremely high temperatures can
keep your compact disc player
from working. On hot days, use the
air conditioning to cool the vehicle
interior before you listen to a disc.
Bumpy roads or other vibrations
may make your compact disc play-
er skip.
If moisture gets into your compact
disc player, you may not hear any
sound even though your compact
disc player appears to be working.
Remove the disc from the player
and wait until it dries.
Handle compact discs carefully, es-
pecially when you are inserting
them. Hold them on the edge and
do not bend them. Avoid getting
fingerprints on them, particularly on
the shiny side.
Dirt, scrapes, warping, pin holes,
or other disc damage could cause
the player to skip or to repeat a
section of a track. (To see a pin
hole, hold the disc up to the light.)
Remove discs from the compact
disc player when you are not lis-
tening
to them. Store them in their plastic
cases away from moisture, heat,
and direct sunlight.
To clean a compact disc: Wipe it with
a soft, lint- free cloth that has been
dampened with water. Wipe in a
straight line from the center to the
edge of the disc (not in circles). Dry
it with another soft,
lint- free cloth. Do not use a conven-
tional record cleaner or anti- static de-
vice.

4RUNNER (1998)
A new disc may have rough edges
on its inner and outer perimeter.
Remove the rough edges by press-
ing the side of a ball- point pen or
pencil against the inner and outer
perimeter of the disc as shown.
If you continue to play a disc with
rough edges, flakes will fall on to the
signal side of the disc and cause
sound skipping or other problems.
CAUTION
Compact disc players use invis-
ible laser beam which could
cause hazardous radiation expo-
sure if directed outside the unit.
Be sure to operate the player cor-
rectly as instructed.
1. Air Intake Selector
2. Temperature Selector
3. Air Flow Selector
4. Fan Speed Selector
5. ºA/Cº Button (on some mod-
els)
Air conditioning systemÐ
ÐControls

4RUNNER (1998)
Moving the air flow control knob to
windshield position turns on the de-
froster- linked air conditioning. This is
to clean up the front view more quick-
ly.
When the ºA/Cº button is not pressed
in, moving the air flow control knob to
another position turns off the air
conditioning.
Air intake selector
Move the lever to select the air
source.
1. Recirculate ÐRecirculates the air
inside the vehicle.
2. Fresh ÐDraws outside air into the
system. ºA/Cº button
To turn on the air conditioning, press
the ºA/Cº button. The ºA/Cº button in-
dicator will come on. To turn the air
conditioning off, press the button
again. If the ºA/Cº button indicator flashes,
there is a problem in the air condition-
ing system and the air conditioning
automatically shuts off. If this hap-
pens, take your vehicle to a Toyota
dealer for service.

4RUNNER (1998)
ÐOperating tips
To cool off your Toyota after it has
been parked in the hot sun, drive
with the windows open for a few
minutes. This vents the hot air, al-
lowing the air conditioning to cool
the interior more quickly.
Make sure the air intake grilles in
front of the windshield are not
blocked (by leaves or snow, for
example).
On humid days, do not blow cold
air on the windshield. The wind-
shield could fog up because of the
difference in air temperature on the
inside and outside of the wind-
shield.
Keep the area under the front
seats clear to allow air to circulate
throughout the vehicle.
On cold days, move the fan speed
selector to ºHIº for a minute to
help clear the intake ducts of snow
or moisture. This can reduce the
amount of fogging on the windows. Heating
For best results, set controls to:
Fan speedÐ Any setting except
ºOFFº
TemperatureÐ To w a r d s WARM
(red zone)
Air intakeÐFRESH (outside air)
Air flowÐFLOOR
Air conditioningÐOFF
For quick heating, select recircu-
lated air for a few minutes. To
keep the windows from fogging, se-
lect fresh after the vehicle interior
has been warmed.
Press the ºA/Cº button on for dehu-
midified heating.
Choose floor/windshield air flow to
heat the vehicle interior while de-
frosting or defogging the wind-
shield. Air conditioning
For best results, set controls to:
Fan speedÐ Any setting except
ºOFFº TemperatureÐ To w a r d s COLD
(blue zone)
Air intakeÐFRESH (outside air)
Air flowÐPANEL
Air conditioningÐON For quick cooling, move the air in-
take selector to recirculate for a
few minutes.
Ventilation
For best results, set controls to:
Fan speedÐ Any setting except
ºOFFº TemperatureÐ To w a r d s COLD
(blue zone)
Air intakeÐFRESH (outside air)
Air flowÐPANEL
Air conditioningÐOFF

4RUNNER (1998)
Defogging
The inside of the windshield
For best results, set controls to: Fan speedÐ Any setting except
ºOFFº
TemperatureÐ To w a r d s WARM
(red zone) to heat; COLD (blue zone)
to
cool
Air intakeÐFRESH (outside air)
Air flowÐWINDSHIELD
Vehicles with ºA/Cº buttonÐ
Moving the air flow control knob to
windshield position turns on the de-
froster- linked air conditioning. This is
to clean up the front view more quick-
ly.
When the ºA/Cº button is not pressed
in, moving the air flow control knob to
another position turns off the air
conditioning.
On humid days, do not blow cold
air on the windshieldÐthe differ-
ence between the outside and in-
side temperatures could make the
fogging worse. Defrosting
The outside of the windshield
For best results, set controls to:
Fan speedÐ Any setting except
ºOFFº TemperatureÐ To w a r d s
WARM
(red zone)
Air intakeÐFRESH (outside air)
Air flowÐWINDSHIELD
Vehicles with ºA/Cº buttonÐ
Moving the air flow control knob to
windshield position turns on the de-
froster- linked air conditioning. This is
to clean up the front view more quick-
ly.
When the ºA/Cº button is not pressed
in, moving the air flow control knob to
another position turns off the air
conditioning.
To heat the vehicle interior while
defrosting the windshield, choose
floor/windshield air flow. ÐInstrument panel vents