1998 TOYOTA 4RUNNER CD player

4RUNNER (1998)
AM
FadingÐAM broadcasts are reflected
by the upper atmosphereÐespecially
at night. These reflected signals can
interfere with those received directly
from the radio station, causing the ra-
dio station to sound alternately strong
and weak.
Station interferenceÐWhen a reflected
signal and a signal received directly
from a radio station are very nearly
the same frequency, they can interfere
with each other, making it difficult to
hear the broadcast.
StaticÐAM is easily affected by exter-
nal sources of electrical noise, such
as high tension power lines, lighten-
ing, or electrical motors. This results
in static.
CARING FOR YOUR CASSETTE
PLAYER AND TAPES
For high performance from your cas-
sette player and tapes:
Clean the tape head and other parts
regularly.
A dirty tape head or tape path can
decrease sound quality and tangle
your cassette tapes. The easiest
way to clean them is by using a
cleaning tape. (A wet type is rec-
ommended.) Use high- quality cassettes.
Low- quality cassette tapes can
cause many problems, including
poor sound, inconsistent playing
speed, and constant auto- revers-
ing. They can also get stuck or
tangled in the cassette player.
Do not use a cassette if it has
been damaged or tangled or if its
label is peeling off.
Do not leave a cassette in the
player if you are not listening to it,
especially if it is hot outside.
Store cassettes in their cases and
out of direct sunlight.
Avoid using cassettes with a total
playing time longer than 100 min-
utes (50 minutes per side). The
tape used in these cassettes is
thin and could get stuck or tangled
in the cassette player.

4RUNNER (1998)
CARING FOR YOUR COMPACT DISC
PLAYER AND DISCS
Use only compact discs labeled as
shown.
Extremely high temperatures can
keep your compact disc player
from working. On hot days, use the
air conditioning to cool the vehicle
interior before you listen to a disc.
Bumpy roads or other vibrations
may make your compact disc play-
er skip.
If moisture gets into your compact
disc player, you may not hear any
sound even though your compact
disc player appears to be working.
Remove the disc from the player
and wait until it dries.
Handle compact discs carefully, es-
pecially when you are inserting
them. Hold them on the edge and
do not bend them. Avoid getting
fingerprints on them, particularly on
the shiny side.
Dirt, scrapes, warping, pin holes,
or other disc damage could cause
the player to skip or to repeat a
section of a track. (To see a pin
hole, hold the disc up to the light.)
Remove discs from the compact
disc player when you are not lis-
tening
to them. Store them in their plastic
cases away from moisture, heat,
and direct sunlight.
To clean a compact disc: Wipe it with
a soft, lint- free cloth that has been
dampened with water. Wipe in a
straight line from the center to the
edge of the disc (not in circles). Dry
it with another soft,
lint- free cloth. Do not use a conven-
tional record cleaner or anti- static de-
vice.

4RUNNER (1998)
A new disc may have rough edges
on its inner and outer perimeter.
Remove the rough edges by press-
ing the side of a ball- point pen or
pencil against the inner and outer
perimeter of the disc as shown.
If you continue to play a disc with
rough edges, flakes will fall on to the
signal side of the disc and cause
sound skipping or other problems.
CAUTION
Compact disc players use invis-
ible laser beam which could
cause hazardous radiation expo-
sure if directed outside the unit.
Be sure to operate the player cor-
rectly as instructed.
1. Air Intake Selector
2. Temperature Selector
3. Air Flow Selector
4. Fan Speed Selector
5. ºA/Cº Button (on some mod-
els)
Air conditioning systemÐ
ÐControls