1998 TOYOTA 4RUNNER Parts

4RUNNER (1998)
Keep the bottom of your vehicle
free from mud, etc. This not only
lessens weight but also helps pre-
vent corrosion.
Keep your vehicle tuned- up and
in top shape. A dirty air cleaner,
improper valve clearance, dirty
plugs, dirty oil and grease, brakes
not adjusted, etc. all lower engine
performance and contribute to poor
fuel economy. For longer life of all
parts and lower operating costs,
keep all maintenance work on
schedule, and if you often drive
under severe conditions, see that
your vehicle receives more frequent
maintenance (For scheduled main-
tenance information, please refer to
the separate ºOwner 's Manual Sup-
plement/Maintenance Scheduleº).
CAUTION
Never turn off the engine to coast
down hills. Your power steering
and brake booster will not func-
tion without the engine running.
Also, the emission control system
operates properly only when the
engine is running.

4RUNNER (1998)
Part 5
CORROSION
PREVENTION AND
APPEARANCE CARE
Protecting your Toyota from
corrosion
Washing and waxing your
To y o t a
Cleaning the interior
Toyota, through its d iligent research,
design and use of the most advanced
technology available, has done its part
to help prevent corrosion and has pro-
vided you with the finest quality ve-
hicle construction. Now, it is up to
you. Proper care of your Toyota can
help ensure long- term corrosion pre-
vention.
The most common causes of corro-
sion to your vehicle are:
The accumulation of road salt, dirt
and moisture in hard- to- reach
areas under the vehicle.
Chipping of paint, or undercoating
caused by minor accidents or by
stones and gravel.
Care is especially important if you
live in particular areas or operate
your vehicle under certain environ-
mental conditions: Road salt or dust control chemicals
will accelerate corrosion, as will
the presence of salt in the air near
the sea- coast or in areas of indus-
trial pollution.
High humidity accelerates corrosion
especially when temperatures range
just above the freezing point.
Wetness or dampness to certain
parts of your vehicle for an ex-
tended period of time, may cause
corrosion even though other parts
of the vehicle may be dry.
High temperatures will cause corro-
sion to those components of the
vehicle which are prevented from
quick- drying due to lack of proper
ventilation.
The above signifies the necessity to
keep your vehicle, particularly the un-
derside, as clean as possible and to
repair any damage to paint or protec-
tive coatings as soon as possible.
To help prevent corrosion on your
Toyota, follow these guidelines:
Wash your vehicle frequently. It is,
of course, necessary to keep your ve-
hicle clean by regular washing, but to
prevent corrosion, the following points
should be observed:
If you drive on salted roads in the
winter or if you live near the
ocean, you should hose off the un-
dercarriage at least once a month
to minimize corrosion.
Protecting your Toyota
from corrosion

4RUNNER (1998)
High pressure water or steam is
effective for cleaning the vehicle's
underside and wheel housings. Pay
particular attention to these areas
as it is difficult to see all the mud
and dirt. It will do more harm than
good to simply wet the mud and
debris without removing them. The
lower edge of doors, rocker panels
and frame members have drain
holes which should not be allowed
to clog with dirt as trapped water
in these areas can cause corro-
sion.
Wash the underside of the vehicle
thoroughly when winter is over.
See ºWashing and waxing your Toyo-
taº for more tips.
Check the condition of your ve-
hicle's paint and trim. If you find any
chips or scratches in the paint, touch
them up immediately to prevent corro-
sion from starting. If the chips or
scratches have gone through the bare
metal, have a qualified body shop
make the repair. Check the interior of your vehicle.
Water and dirt can accumulate under
the floor mats and could cause corro-
sion. Occasionally check under the
mats to make sure the area is dry. Be
particularly careful when transporting
chemicals, cleansers, fert
ilizers, salt,
etc; these should be transported in
proper containers. If a spill or leak
should occur, immediately clean and
dry the area.
Use mud shields on your wheels. If
you drive on salted or gravel roads,
mud shields help protect your vehicle.
Full- size shields, which come as near
to the ground as possible, are the
best. We recommend that the fittings
and the area where the shields are
installed be treated to resist corrosion.
Your Toyota dealer will be happy to
assist in supplying and insta lling the
shields if they are recommended for
your area.
Keep your vehicle in a well venti-
lated garage or a roofed place. Do
not park your vehicle in a damp,
poorly ventilated garage. If you wash
your vehicle in the garage, or if you
drive it in covered with water or snow,
your garage may be so damp it will
cause corrosion. Even if your garage
is heated, a wet vehicle can corrode
if the ventilation is poor. Washing your Toyota
Keep your vehicle clean by regular
washing.
The following cases may cause weak-
ness to the paint or corrosion to the
body and parts. Wash your vehicle as
soon as possible.
When driving in a coastal area
When driving on a road sprinkled
with antifreeze
When having stuck of coal tar, tree
sap, bird droppings and carcass of
an insect
when driving in the areas where
there are a lot of smoke, soot,
dust, iron dust and chemical sub-
stance
When the vehicle becomes remark-
ably dirty with dust and mud
Hand- washing your Toyota
Work in the shade and wait until
the vehicle body is not hot to the
touch.
CAUTION
When cleaning under floor or
chassis, be careful not to injure
your hands.
Washing and waxing your
To y o t a

4RUNNER (1998)
Part 6
VEHICLE
MAINTENANCE
AND CARE
Maintenance requirements
General maintenance

Does your vehicle need
repairing?
For scheduled maintenance in-
formation, please refer to the
separate ºOwner 's Manual Sup-
plement/Maintenance Scheduleº. Maintenance requirements
Your Toyota vehicle has been de-
signed to for fewer maintenance re-
quirements with longer service inter-
vals to save both your time and
money. However, each regular mainte-
nance, as well as day- to- day care, is
more important than ever before to
ensure smooth, and trouble- free, safe,
and economical drivings.
It is the owner 's responsib
ility to
make sure the specified maintenance,
including general maintenance service,
is performed. Note that both the new
vehicle and emission control system
warranties specify that proper mainte-
nance and care must be performed.
See ºOwner 's Guideº, ºOwner 's Manu-
al Supplementº or ºWarranty Bookletº
for complete warranty information.
General maintenance
General maintenance items are those
day- to- day care practices that are im-
portant to your vehicle for proper op-
eration. It is the owner 's responsib ility
to ensure that the general mainte-
nance items are performed regularly.
These checks or inspections can be
done either by yourself or a qualified
technician, or if you prefer, your Toyo-
ta dealer will be pleased to do them
at a nominal cost. Scheduled maintenance
The scheduled maintenance items
listed in the ºOwner 's Manual Supple-
ment/Maintenance Scheduleº are those
required to be serviced at regular in-
tervals.
For details of your maintenance
schedule, read the separate ºOwner 's
Manual Supplement/Maintenance
Scheduleº.
It is recommended that any replace-
ment parts used for maintenance or
for the repair of the emission con-
trol system be Toyota supplied.
The owner may elect to use non-
Toyota supplied parts for replace-
ment purposes without invalidating
the emission control system warran-
ty. However, use of replacement
parts which are not of equivalent
quality may impair the effectiveness
of the emission control systems.
You may also elect to have mainte-
nance, replacement, or repair of the
emission control devices and sys-
tem performed by any automotive
repair establishment or individual
without invalidating this warranty.
See ºOwner 's Guideº, ºOwner 's
Manual Supplementº or ºWarranty
Bookletº for complete warranty in-
formation.

4RUNNER (1998)
If you perform maintenance by
yourself, be sure to follow the cor-
rect procedure given in this part.
You should be aware that improper or
incomplete servicing may result in op-
erating problems.
Performing do- it- yourself maintenance
during the warranty period may affect
your warranty coverage. Read the
separate Toyota Warranty statement
for details and suggestions.
This part gives instructions only for
those items that are relatively easy
for an owner to perform. As explained
in Part 6, there are still a number of
items that must be done by a qualified
technician with special tools.
For information on tools and parts for
do- it- yourself maintenance, see ºParts
and toolsº.
Utmost care should be taken when
working on your vehicle to prevent
accidental injury. Here are a few pre-
cautions that you should be especially
careful to observe:
CAUTION
When the engine is running,
keep hands, clothing, and tools
away from the moving fan and
engine drive belts. (Removing
rings, watches, and ties is ad-
visable.)
Right after driving, the engine
compartmentÐthe engine, radia-
tor, exhaust manifold, power
steering fluid reservoir and
spark plug boots, etc.Ðwill be
hot. So be careful not to touch
them. Oil, fluids and spark
plugs may also be hot.
If the engine is hot, do not re-
move the radiator cap or loosen
the drain plugs to prevent burn-
ing yourself.
Do not smoke, cause sparks or
allow open flames around fuel
or the battery. Their fumes are
flammable.
Be extremely cautious when
working on the battery. It con-
tains poisonous and corrosive
sulfuric acid.
Do not get under your vehicle
with just the body jack support-
ing it. Always use automotive
jack stands or other solid sup-
ports.
Do- it- yourself service
precautions

4RUNNER (1998)
Use eye protection whenever
you work on or under your ve-
hicle where you may be ex-
posed to flying or falling mate-
rial, fluid spray, etc.
Used engine oil contains poten-
tially harmful contaminants
which may cause skin disorders
such as inflammation or skin
cancer, so care should be taken
to avoid prolonged and repeated
contact with it. To remove used
engine oil from your skin, wash
thoroughly with soap and water.
Do not leave used oil within the
reach of children.
Dispose of used oil and filter
only in a safe and acceptable
manner. Do not dispose of used
oil and filter in household
trash, in sewers or onto the
ground. Call your dealer or a
service station for information
concerning recycling or dispos-
al.NOTICE
Remember that battery and igni-
tion cables carry high currentsor voltages. Be careful of acci-dentally causing a short circuit.
Add only demineralized or dis-tilled water to fill the radiator.And if you spill some of the
coolant, be sure to wash it offwith water to prevent it from
damaging the parts or paint.
Do not allow dirt or anythingelse to fall through the spark
plug holes.
Do not pry the outer electrode
of a spark plug against the cen-ter electrode.
Use only spark plugs of the
specified type. Using othertypes will cause engine damage,loss of performance or radio
noise.
Do not overfill automatic trans-mission fluid, or the transmis-sion could be damaged.
Do not drive with the air clean-
er filter removed, or excessiveengine wear could result. Alsobackfiring could cause a fire in
the engine compartment.
Be careful not to scratch theglass surface with the wiper
frame.
When closing the engine hood,check to see that you have notforgotten any tools, rags, etc.

4RUNNER (1998)
Parts and tools
Here is a list of parts and tools you
will need on performing do- it- yourself
maintenance. Remember all Toyota
parts are designed in metric sizes, so
your tools must be metric.
Checking the engine oil level
Parts (if level is low): Engine oil API grade SH, ºEnergy-
Conserving IIº or SJ, ºEnergy-
Conservingº multigrade or ILSAC
multigrade having viscosity proper
for your climate
Tools: Rag or paper towel
Funnel (only for adding oil)
Checking the engine coolant level
Parts (if level is low): Ethylene- glycol antifreeze
Demineralized or distilled water
Tools: Funnel (only for adding coolant)
Checking brake fluid
Parts (if level is low): SAE J1703 or FMVSS No. 116
DOT 3 brake fluid
Tools: Rag or paper towel
Funnel (only for adding fluid) Checking power steering fluid
Parts (if level is low):
Automatic transmission fluid DEXRON II or III
Tools: Rag or paper towel
Funnel (only for adding fluid)
Checking battery condition
Tools: Warm water
Baking soda
Grease
Conventional wrench (for terminal
clamp bolts)
Checking and replacing fuses
Parts (if replacement is necessary): Fuse with same amperage rating
as original
Tools: Conventional wrench (for instrument
lower panel nut)
Adding washer fluid
Parts: Water
Washer fluid containing antifreeze
(for winter use)
Tools: Funnel Replacing light bulbs
Parts:
Bulb with same number and watt-
age rating as original (See charts
in ºReplacing light bulbsº in Chap-
ter 7- 3.)
Tools: Screwdriver

4RUNNER (1998)
Checking brake fluid
To check the fluid level, simply look
at the see- through reservoir. The
level should be between the ºMAXº
and ºMINº lines on the reservoir.
It is normal for the brake fluid level
to go down slightly as the brake pads
wear. So be sure to keep the reser-
voir filled.
If the reservoir needs frequent refil-
ling, it may indicate a serious me-
chanical problem.
If the level is low, add SAE J1703
or FMVSS No. 116 DOT 3 brake
fluid to the brake reservoir. Remove and replace the reservoir
cover by hand.
Use only newly opened brake fluid.
Once opened, brake fluid absorbs
moisture from the air, and excess
moisture can cause a dangerous loss
of braking.
CAUTION
Take care when filling the r
eser-
voir because brake fluid can harm
your eyes and damage painted
surfaces. If fluid gets in your
eyes, flush your eyes with clean
water.
NOTICE
If you spill the fluid, be sure to
wash it off with water to preventit from damaging the parts orpaint.