1998 TOYOTA 4RUNNER door lock

4RUNNER (1998)
The back window can be operated
with the inner switch on the center
console or outer switch on the back
door.
OPERATING FROM INSIDE
The ignition key must be in the ºONº
position.
The back window moves as long as
you hold the inner switch.
To open: Push the switch on the
ºDOWNº side.
To close: Push the switch on the ºUPº
side. You can also open the back window
when the back window wiper is work-
ing. At that time, the wiper stops
working until the window is closed
again.
If you push in the window lock button
on the driver's door (with power win-
dow) or on the instrument panel (with-
out power window), the back window
cannot be operated.

4RUNNER (1998)
Always make sure the head,
hands and other parts of the
body of all occupants are kept
completely inside the vehicle
before you close the power
back window. If someone's
neck, head or hands gets
caught in a closing window, it
could result in a serious injury.
When anyone closes the power
back window, be sure that they
operate the window safely.
When small children are in the
vehicle, never let them use the
power back window switch with-
out supervision. Use the win-
dow lock button to prevent
them from making unexpected
use of the switch.
Never leave small children alone
in the vehicle, especially with
the ignition key still inserted.
They could use the power back
window switch and get trapped
in a window. Unattended chil-
dren can become involved in
serious accidents.
Keep the back window closed
while driving. This not only
keeps the luggage from being
thrown out but also prevents
exhaust gases from entering the
vehicle.Back door

4RUNNER (1998)
LOCKING AND UNLOCKING WITH KEY
Insert the key into the keyhole and
turn it.
To lock: Turn the key clockwise.
To unlock: Turn the key counterclock-
wise.
The back door will be controlled by
operating the power door lock switch.
When closing the back door, make
sure it is fully closed.
See ºLuggage stowage precautionsº in
Part
2 for precautions to observe in
loading luggage.
CAUTION
Keep the back window and back
door closed while driving. This
not only keeps the luggage from
being thrown out but also pre-
vents exhaust gases from enter-
ing the vehicle.

4RUNNER (1998)
Type C
LOCKING AND UNLOCKING WITH
POWER BACK DOOR LOCK SWITCH
Push the switch.
To lock: Push the switch on the
ºLOCKº side.
To unlock: Push the switch on the
ºUNLOCKº side.
Vehicles with a power door lock sys-
temÐ
Operating the power door lock switch
simultaneously locks or unlocks the
back door (see ºSide doorsº). Hood

4RUNNER (1998)
Before closing the hood, check to see
that you have not forgotten any tools,
rags, etc. and return the support rod
to its clip- this prevents rattles. Then
lower the hood make sure it locks into
place. If necessary, press down gently
on the front edge to lock it.
CAUTION
After inserting the support rod
into the slot, make sure the rod
supports the hood security from
falling down on to your head or
body.
Fuel tank cap
1. To open the fuel filler door, pull the lever. When refueling, turn off the engine.

4RUNNER (1998)
HEADLIGHTS
To turn on the following lights:
Twist the headlight/turn signal leverknob.
Position 1ÐParking, tail, license plate,
side marker and instrument panel
lights
Position 2ÐHeadlights and all of the
above
If you turn the ignition switch to the
ºLOCKº position with the headlights
left on, a buzzer reminds you to turn
the lights off when you open the driv-
er 's door.
NOTICE
To prevent the battery from being
discharged, do not leave thelights on for a long period whenthe engine is not running.
Daytime running light system (Cana-
da only)
The headlights turn on when the park-
ing brake is released with the engine
started, even with the light switch in
the ºOFFº position. They will not go
off until the ignition switch is turned
off.
To turn on the other exterior lights
and instrument panel lights, twist the
knob to the position 1. Under the daytime running light sys-
tem, the headlights turn on at reduced
intensity. Twist the knob to the posi-
tion 2 to turn to full intensity for driv-
ing at night.

4RUNNER (1998)
(e) Malfunction Indicator Lamp
This lamp comes on in the following
cases.
a. The fuel tank is completely empty. (See ºFuel gaugeº in Chapter
1- 5 for instructions.)
b. The fuel tank cap is not tightened
securely. (See ºFuel tank capº in
Chapter 1- 2 for instructions.)
c. There is a problem somewhere in
your engine or automatic transmis-
sion electrical system.
If it comes on while you are driving
in case c, have your vehicle checked/
repaired by your Toyota dealer as
soon as possible.
(f) Low Fuel Level Warning Light
This light comes on when the fuel
level in the tank becomes nearly
empty. Fill up the tank as soon as
possible.
On inclines or curves, due to the
movement of fuel in the tank, the low
fuel level warning light may come on
earlier than usual.
(g) ºABSº Warning Light
This light warns that there is a prob-
lem somewhere in your anti- lock
brake system. If the light comes on while you are
driving, have your vehicle checked by
your Toyota dealer as soon as pos-
sible.
The light will come on when the igni-
tion key is turned to the ºONº posi-
tion. After about 3 seconds, the light
will go off.
When the ºABSº warning light is on
(and the brake system warning light is
off), the brake system operates con-
ventionally but anti- lock brake system
is not assisting brake performance so
that the wheels can lock- up during
sudden braking or braking on slippery
road surfaces.
Vehicles with rear differential lock sys-
temÐ
The anti-lock brake system does not
operate when the rear differential is
locked. It is normal operation for the
ºABSº warning light to be on at this
time.
(h) Open Door Warning Light
This light remains on until all the
doors and back door are completely
closed.
(i) SRS Airbag Warning Light
This light will come on when the
ignition key is turned to the ºACCº
or ºONº position. After about 6 se-
conds, the light will go off. This
means the airbag system is operat-
ing properly.
The warning light system monitors the
airbag sensor assembly, inflators,
warning light, interconnecting wiring
and power sources.
If either of the following conditions
occurs, this indicates a malfunction
somewhere in the parts monitored by
the warning light system. Contact your
Toyota dealer as soon as possible to
service the vehicle.
The light does not come on when
the ignition key is turned to the
ºACCº or ºONº position or remains on.
The light comes on while driving.
(j) Light Reminder Buzzer
This buzzer will sound if the driver 's
door is opened while the ignition
switch is turned to the ºLOCKº posi-
tion with the headlight switch on. Re-
moving the key will not stop the buzz-
er as long as the headlight switch is on.

4RUNNER (1998)
(k) Key Reminder Buzzer
This buzzer reminds you to remove
the key when you open the driver's
door with the ignition key in the ºACCº
or ºLOCKº position.
(l) Unengaged ºParkº Warning
Light
( vehicles with automatic
transmission)
This light warns that the transmission
ºParkº mechanism is not engaged. If
the front drive control lever is in the
ºNº position while the selector lever is
in the ºPº position, the transmission
will disengage and the wheels will not
lock.
CAUTION
To restore the park function, shift
the front drive control lever out
of ºNº, or the vehicle can move.
(m) Automatic Transmission Fluid Temperature Warning Light
This light warns that the automatic
transmission fluid temperature is too
high.
If this light comes on while you are
driving, slow down and pull off the
road. Stop the vehicle at a safe place
and put the selector lever in ºPº. With
the engine idling, wait until the light
goes off. If the light goes off, you
may start the vehicle again. If the
light does not go off, call a Toyota
dealer or qualified repair shop for as-
sistance.
NOTICE
Continued driving with the warn- ing light on may damage the auto-matic transmission.
(n) Low windshield Washer Fluid Level Warning Light (Canada)
The light warns that the windshield
washer fluid level is too low. Add
washer fluid at your earliest opportuni-
ty. (For instructions, see ºAdding
washer fluidº in Chapter 7- 3.) CHECKING SERVICE REMINDER
INDICATORS
1. Apply the parking brake.
2. Open one of the side doors or the back door.
The open door warning light should
come on.
3. Close the door. The open door warning light should
go off.
4. Turn the ignition key to ºACCº. The SRS airbag warning light
should come on. It goes off after
about 6 seconds.
5. Turn the ignition key to ºONº, but do not start the engine.
All the service reminder indicators
except the open door warning light
and SRS airbag warning light
should come on. The ºABSº warn-
ing light goes off after about 3 se-
conds.