IMMOBILIZER SYSTEM 9W-15
Notice
For circuit diagram of gasoline vehicle, refer to the ECU diagram.
IMMOBILIZER ANTENNA
Immobilizer antenna is installed in key set outer surface (it is
installed in the location of key hall illumination).(see the figure)
1 Immobilizer Antenna
2 Key
3 Transponder
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
9W-16 IMMOBILIZER SYSTEM
4. Remove the transponder. Carefully remove the old shock
absorbing sealant with a razor blade if applied.
5. Replace the transponder with new one, and apply the small
amount of shock absorbing sealant.
6. Installation should follow the removal procedure in the
reverse order.
1 Transponder
Replacement Procedure
1. Open the cover on key handle.
2. Remove the small screw in symmetrical position of key
illumination.
3. Remove the cover.
