
Remember:  Anti-lock  doesn’t  change  the  time  you  need to  get  your  foot  up  to  the  brake  pedal  or  always  decrease 
stopping  distance. 
If you  get  too close  to  the vehicle  in 
fiont  of  you,  you  won’t  have  time  to  apply  your  brakes 
if that  vehicle  suddenly  slows  or  stops.  Always  leave 
enough  room  up  ahead  to  stop,  even  though  you  have  anti-lock  brakes. 
Using Anti-Lock 
Don’t  pump  the  brakes.  Just  hold  the  brake  pedal  down 
fiiy  and  let  anti-lock  work  for you.  You  may  feel  a 
slight  brake  pedal  pulsation  or notice  some  noise,  but 
this is normal. 
Traction  Control  System (If Equipped) 
Your vehicle  may  have  a  traction  control  system  that 
limits wheel  spin. This is  especially  useful  in  slippery 
road  conditions.  The system  operates  only  if  it senses 
that  one or  both  of  the  front  wheels 
are spinning  or 
beginning  to  lose  traction.  When  this  happens,  the  system  works  the  front  brakes  and  reduces  engine  power 
to 
limit wheel  spin. 
You  may  feel 
or hear  the  system  working,  but this 
is normal. 
If your  vehicle  is  in  cruise  control  when  the traction 
control  system  begins  to  limit  wheel  spin,  the  cruise 
control  will  automatically  disengage.  When  road 
conditions  allow  you  to  safely  use  it again,  you  may 
reengage  the  cruise  control.  (See  “Cruise  Control” 
in  the  Index.) 
TRACTION 
OFF 
This  light  should  come on 
briefly  when  you start the 
engine. 
If it  stays  on or 
comes  on while you are 
driving,  there’s  a  problem 
with  your  traction 
control  system. 
See “Traction Control System Warning Light” in the 
Index.  When  this  warning  light is  on,  the  system  will  not 
limit  wheel  spin.  Adjust 
your driving  accordingly. 
The  traction  control  system  automatically  comes  on 
whenever  you  start  your  vehicle.  To limit  wheel  spin, 
especially  in  slippery  road  conditions,  you  should 
always  leave  the  system  on.  But  you  can  turn  the 
traction  control  system 
off if  you  ever  need  to.  (You 
should  turn  the  system 
off if  your  vehicle  ever  gets  stuck 
in 
sand, mud, ice or snow. See ‘‘Rockiniz Your Vehicle” 
in  the  Index.) 
4-9  

To turn the  system off, press 
the 
TRACTION 
CONTROL button  located 
on  the  console  next  to  the 
gear 
shift selector. 
The  traction  control  system  warning  light  will  come  on 
and stay on. If the system is limiting wheel spin when 
you  press  the  button,  the  warning  light will come  on -- 
but  the  system  won’t  turn off right  away.  It will wait 
until  there’s  no  longer a current  need  to limit  wheel  spin. 
You  can 
turn the  system  back  on  at any time  by pressing 
the  button  again.  The  traction  control  system  warning 
light  should  go 
off. 
Braking  in  Emergencies 
With anti-lock,  you  can  steer and brake at the same 
time. In many  emergencies,  steering  can  help you  more 
than even  the  very  best  braking. 
Steering 
Power  Steering 
If  you  lose power  steering  assist  because  the  engine 
stops  or the  system  is not  functioning,  you 
can steer but 
it will  take  much  more  effort. 
Magnasteer TM 
Your vehicle  is equipped  with  GM  Magnasteer m, a 
steering  system  that  continuously  adjusts 
the effort  you 
feel  when  steering  at 
all vehicle  speeds. It provides  ease 
when  parking,  yet  a 
firm, solid feel at  highway  speeds. 
Your steering  can  be  adjusted  for an easier or more  firm 
setting.  See  your  dealer  for information. 
Steering Tips 
Driving on Curves 
It’s  important  to  take  curves  at a reasonable  speed. 
A lot of the  “driver  lost control”  accidents  mentioned on 
the  news  happen  on  curves.  Here’s  why: 
4-10  

Experienced  driver  or  beginner,  each of us  is  subject  to 
the  same  laws 
of physics  when  driving  on  curves.  The 
traction 
of the  tires  against  the road  surface  makes  it 
possible  for the  vehicle  to  change  its  path  when  you  turn 
the  front  wheels.  If  there’s  no traction,  inertia  will  keep 
the  vehicle  going  in  the  same  direction.  If  you’ve 
ever 
tried  to  steer  a  vehicle  on  wet  ice,  you’ll  understand this. 
The  traction  you  can  get in a curve depends  on  the 
condition 
of your tires and  the  road  surface,  the  angle  at 
which  the  curve 
is banked,  and  your speed. While  you’re 
in a  curve, speed is the  one  factor  you  can  control. 
Suppose  you’re  steering  through  a  sharp  curve.  Then  you  suddenly  accelerate.  Both  control  systems 
-- steering  and 
acceleration 
-- have  to  do  their  work  where  the  tires  meet 
the road. Adding the sudden acceleration can demand too 
much  of  those  places.  You  can  lose  control.  Refer  to  ‘Traction  Control”  in  the  Index. 
What  should  you  do  if  this  ever  happens?  Ease  up  on  the  accelerator  pedal,  steer  the  vehicle  the  way  you  want  it 
to  go,  and  slow  down. 
Speed  limit  signs  near  curves  warn  that  you  should 
adjust your speed. Of course,  the  posted  speeds  are 
based  on  good  weather  and  road  conditions.  Under  less 
favorable  conditions  you’ll  want 
to go  slower. 
If you  need  to  reduce  your  speed  as  you  approach a 
curve,  do  it before  you  enter  the  curve,  while  your  front 
wheels  are  straight  ahead. 
Try to adjust  your  speed so you  can  “drive”  through  the 
curve.  Maintain  a  reasonable,  steady  speed.  Wait  to 
accelerate  until 
you are out of the  curve,  and then 
accelerate  gently  into  the  straightaway. 
Steering  in  Emergencies 
There are times  when  steering  can be more  effective  than 
braking.  For  example,  you  come  over  a 
hill and  find a 
truck  stopped 
in your  lane, or a car  suddenly  pulls  out 
from nowhere,  or  a  child darts out  from  between  parked 
cars  and  stops  right 
in front of you.  You  can  avoid  these 
problems by  braking -- if you can stop in time. But 
sometimes  you  can’t;  there  isn’t  room.  That’s  the  time \
 for 
evasive  action 
-- steering  around  the  problem. 
Your  vehicle  can perform 
very well in  emergencies  like 
these.  First  apply  your  brakes.  (See  “Braking  in 
Emergencies”  earlier  in  this  section.)  It is  better  to 
remove 
as much  speed as you  can  from a possible 
collision.  Then  steer  around  the  problem,  to  the 
left or 
right  depending  on  the  space  available.  

0 
0 
0 
0 
Check  your  mirrors,  glance  over  your  shoulder, and 
start  your  left  lane  change signal before  moving  out 
of  the  right  lane 
to pass. When you  are far enough 
ahead 
of the  passed  vehicle  to see  its front in your 
inside  mirror,  activate  your  right  lane  change  signal  and 
move back  into  the  right  lane.  (Remember  that 
your  right  outside  mirror  is convex.  The  vehicle  you 
just  passed  may  seem  to  be  farther  away  from  you 
than  it really  is.) 
Try not  to  pass  more  than  one  vehicle  at a time 
on  two-lane  roads.  Reconsider  before  passing  the 
next  vehicle. 
Don’t  overtake  a slowly  moving  vehicle 
too rapidly. 
Even  though 
the brake  lamps are not  flashing, it may 
be  slowing  down  or 
starting to turn. 
If you’re  being  passed,  make  it easy  for the 
following  driver  to  get  ahead  of  you.  Perhaps  you 
can  ease  a little  to  the  right. 
Loss of Control 
Let’s review  what  driving  experts say  about  what 
happens  when  the  three  control  systems  (brakes,  steering  and  acceleration)  don’t  have  enough  friction  where  the 
tires  meet  the  road  to  do what  the  driver  has  asked. 
In any emergency,  don’t  give  up.  Keep trying to  steer  and 
constantly 
seek an escape route or  area of less  danger. 
Skidding 
In a skid, a  driver  can  lose  control of the  vehicle. 
Defensive  drivers  avoid  most 
skids by taking reasonable 
care 
suited to existing  conditions,  and  by  not  “overdriving” 
those conditions. But skids are always  possible. 
The 
three types of  skids  correspond  to  your  vehicle’s 
three control  systems. In the  braking  skid,  your  wheels 
aren’t  rolling. 
In the  steering  or cornering  skid, too 
much  speed or steering in a curve  causes  tires to slip and 
lose  cornering  force.  And 
in the  acceleration  skid,  too 
much  throttle  causes 
the driving  wheels  to spin. 
A cornering  skid  is best  handled  by easing  your  foot off 
the  accelerator  pedal. 
If  you  have  the  traction  control  system,  remember:  It 
helps  avoid  only  the  acceleration  skid. 
If you  do not  have  traction  control,  or if  the  system is 
off, then an acceleration  skid  is also best  handled  by 
easing  your  foot 
off the  accelerator  pedal. 
4-14  

If your  vehicle  starts  to  slide,  ease your  foot off the 
accelerator  pedal  and  quickly  steer  the  way  you  want  the 
vehicle  to  go.  If you  start  steering  quickly  enough,  your 
vehicle  may  straighten  out.  Always  be  ready  for a 
second  skid  if  it occurs. 
Of course,  traction  is reduced  when  water,  snow,  ice, 
gravel  or  other  material  is on  the  road. 
For safety,  you’ll 
want 
to slow  down  and  adjust  your  driving  to  these 
conditions. 
It is  important  to  slow  down on slippery 
surfaces  because  stopping  distance 
will be  longer  and 
vehicle  control  more  limited. 
While  driving  on 
a surface  with  reduced  traction, try 
your  best  to  avoid  sudden  steering,  acceleration  or 
braking  (including  engine  braking  by  shifting  to  a 
lower gear). Any sudden changes could cause the tires 
to  slide. You may  not  realize  the surface  is slippery  until 
your  vehicle  is  skidding.  Learn  to  recognize  warning 
clues -- such  as  enough  water,  ice  or  packed  snow  on 
the  road  to  make  a  “mirrored  surface” 
-- and  slow  down 
when  you  have  any  doubt. 
Remember:  Any  anti-lock  brake  system 
(ABS) helps 
avoid  only  the  braking  skid. 
Driving at Night 
..... ............ ........... ............ ........... ............ ...................I____ 
Night  driving  is  more  dangerous  than  day  driving.  One 
reason  is  that  some  drivers  are  likely  to 
be impaired -- by 
alcohol  or  drugs,  with  night  vision  problems,  or 
by fatigue. 
4-15  

I Wet  brakes  can cause accidents.  They  won't work 
as well in a quick stop and  may cause pulling  to 
one  side.  You could  lose  control 
of the  vehicle. 
After driving  through  a large  puddle of water or 
a car wash, apply  your  brake  pedal  lightly until 
your  brakes work normally. 
Driving  too  fast  through  large  water  puddles  or even 
going through some car washes can cause problems, too. 
The water  may  affect your brakes. Try to  avoid  puddles. 
But  if 
you can't, try to  slow  down  before you hit  them. 
4-18  

If you drive  regularly  in  steep country, or if you’re 
planning 
to visit  there,  here  are  some  tips  that  can  make 
your 
trips safer and more  enjoyable. 
Keep  your  vehicle  in good shape.  Check all fluid 
levels  and  also  the  brakes,  tires,  cooling  system 
and transaxle. These parts can  work  hard  on 
mountain  roads. 
Know  how  to go down  hills.  The  most  important 
thing to know is this: let your engine do some of the 
slowing  down.  Shift 
to a lower  gear when you  go 
down 
a steep or long hill. 
A CAUTION: 
If you  don’t  shift down,  your  brakes  could 
get 
so hot  that  they  wouldn’t  work  well. You 
would  then  have  poor  braking  or even  none  going 
down  a hill.  You  could  crash.  Shift  down  to  let 
your  engine  assist  your  brakes  on  a  steep 
downhill  slope. 
A CAUTION: 4- 
I 
Coasting downhill in NEUTRAL (N) or with  the 
ignition 
off is dangerous. Your brakes will have to 
do all the  work of slowing down. They  could  get so 
hot that they  wouldn’t work well.  You would then 
have  poor 
braking or  even  none going down a hill. 
You could  crash.  Always  have  your  engine running 
and your vehicle in gear when  you go downhill. 
0 Know how  to  go  uphill.  Drive in the  highest gear possible. 
Stay in your own  lane  when  driving  on  two-lane 
roads in hills or mountains.  Don’t  swing  wide  or cut 
across  the  center 
of the  road.  Drive  at  speeds  that  let 
you  stay  in  your  own  lane. 
As you go over  the  top of a hill,  be  alert.  There 
could be  something  in  your  lane,  like a stalled car or 
an accident. 
You may see highway  signs on mountains  that warn of 
special problems.  Examples are long grades, passing or 
no-passing  zones,  a falling  rocks  area  or  winding 
roads. 
Be alert  to  these and take  appropriate  action. 
4-24  

Your anti-lock  brakes  improve  your  vehicle’s  stability 
when  you  make  a  hard  stop on a  slippery  road.  Even 
though  you  have  the anti-lock  braking  system,  you’ll 
want  to begin  stopping  sooner  than  you  would  on  dry 
pavement.  See  “Anti-Lock”  in the  Index. 
Allow  greater  following  distance  on  any 
slippery  road. 
0 Watch  for slippery  spots.  The road  might  be  fine 
until  you hit  a  spot  that’s  covered  with  ice. 
On an 
otherwise  clear  road,  ice  patches  may  appear  in  shaded  areas  where  the  sun  can’t  reach:  around 
clumps 
of trees,  behind  buildings  or  under  bridges. 
Sometimes  the surface  of 
a curve  or an overpass  may 
remain  icy  when  the surrounding  roads 
are clear. If 
you see a patch of ice ahead of you,  brake  before  you 
are on it. Try  not  to  brake  while  you’re  actually  on 
the  ice,  and  avoid  sudden  steering  maneuvers. 
If You’re  Caught  in  a Blizzard 
If  you  are  stopped  by  heavy  snow,  you  could  be in a 
serious  situation.  You should  probably  stay  with  your 
vehicle  unless  you  know  for sure  that  you  are  near  help 
and  you  can 
hike through  the snow.  Here are some 
things to do  to  summon  help  and keep yourself  and your 
passengers  safe: 
0 Turn on  your  hazard  flashers. 
4-27