ELECTRIC SUPER HICAS
Trouble Diagnosis
with CONSULT (Cont'd)
connector for
'@g SELECT DlAG MODE
SELF-DIAG RESULTS i
DATA MONITOR
ACTIVE TEST
ECM PART NUMBER
u
1 I lhil SELECT MONITOR ITEM I 1
SELECTION FROM MENU
I Il
I
START I
ACTIVE TEST PROCEDURE
After connecting CONSULT to data link connector, start the
engine.
Touch "START", "HICAS and "ACTIVE TEST".
Touch 'SIMULATE" and "SELECT MONITOR ITEM".
Turn the steering wheel right or left to make the rear actuator
operate.
Reference values in normal condition
-- -
0" (Neutral) I 2.4V I 2.4V I No (Approx OV)
Steering angle
sensor
ECM PART NUMBER
Rear steering
angle main sensor
--
R 90"
L 90"
After connecting CONSULT to data link connector, turn ignition
switch ON.
Touch "START', "HICAS" and "ECM PART NUMBER7'.
Part number printed on the control unit label and part number
shown on the CONSULT screen are as follows:
2-door model: 28505
AAI
00
4-door model: 28505 AAll 0
Trouble Diagnosis with Self-diagnosis
Rear steering
angle sub-sensor
4.4V
0.4V
DESCRIPTION
If the system detects some error while vehicle is running, it notifies
the driver of a malfunction
by turning ON the HICAS warning lamp,
and at the same time, it halts the normal control and enters the
fail-safe mode.
Motor current
SELF-DIAGNOSIS PROCEDURE
4.4V
0.4V
1. Start the engine.
2. Within 10 seconds after the engine has started, turn the steer-
ing wheel more than
20" right-to-left and repeat this
5 times or
more, and then depress the brake pedal
5 times or more.
Yes (Variable)
