Replace switch if continuity is not as specified.
LUMBAR/SIDE ADJUSTMENT SWITCH CONTINUITY TABLE (3000GT)
\
\
\
\
\
\
Switch Check Continuity
Position Between Pins No.
Lumbar Support
Push ...................................... 2 & 3; 5 & 7
Off ........................................... 2, 3 & 5
Release ................................... 2 & 5; 3 & 7
Side Support
Spread .................................... 1 & 2; 7 & 8
Off ........................................... 1, 2 & 8
Close ..................................... 1 & 7; 2 & 8
\
\
\
\
\
\
Fig. 3: Identifying Lumbar/Side Adjustment Switch Terminals (3000GT)
Courtesy of Mitsubishi Motor Sales of America
POWER SEAT MOTORS
Eclipse, Galant & Montero
Disconnect each motor harness connector. Connect 12-volt
power supply to motor connector terminals. Reverse power supply leads
to reverse direction of motor operation. Motor should operate freely
and smoothly. If any motor does not operate correctly, replace power
seat adjuster assembly. Motors cannot be replaced individually.
3000GT
Disconnect each motor harness connector. To access lumbar and
side support motor harness connectors, remove seatback panel. Connect
12-volt power supply to motor connector terminals. Reverse power
supply leads to reverse direction of motor operation. Motor should
operate freely and smoothly. If any motor does not operate correctly,
replace power seat adjuster assembly or seatback assembly. Motors
cannot be replaced individually.
POWER SEAT SWITCH
![MITSUBISHI MONTERO 1998 Service Manual Replace switch if continuity is not as specified.
LUMBAR/SIDE ADJUSTMENT SWITCH CONTINUITY TABLE (3000GT)
\
\
\
\](/manual-img/19/57333/w960_57333-1069.png "MITSUBISHI MONTERO 1998 Service Manual Replace switch if continuity is not as specified.
LUMBAR/SIDE ADJUSTMENT SWITCH CONTINUITY TABLE (3000GT)
\
\
\
\")
