1998 MITSUBISHI MONTERO fluid

seats engine oil capacity recommended oil jump start rear entertainment cabin filter

Page 1055 of 1501

$MITSUBISHI MONTERO 1998 Service Manual \b\ \ \ \ \ \ \ Transfer Case All$

\b\
\
\
\
\
\
\

Transfer Case All API Classification GL-4

SAE 75W-85W Or 75W-90
\b
\
\
\
\
\
\
\

(
1) - SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if

the Ambient Temperature is above 0 F (-18 C).

(
2) - SAE90, 85W-90, 80W-90 may be used in temperatures above

-10 F (-23 C). SAE 80W, 80W-90 may be used in temperatures

from -30 F (-34 C) to -10 F (-23 C). SAE 75W may be used

in temperatures below -30 F (-34 C).
\b
\
\
\
\
\
\
\

FLUID CAPACITIES
\b
\
\
\
\
\
\
\

Item Condition Specification (1)
\b
\
\
\
\
\
\
\

Engine Oil Oil Pan 4.5 Qts. (4.3L)

(
1) \b \
\
\
\
\

Oil Filter 0.32 Qts. (0.3L)

\b
\
\
\
\
\

Oil Cooler 0.32 Qts. (0.3L)
\b
\
\
\
\
\
\
\

Engine Drained; With Reserve Tank 10 Qts. (9.5L)

Coolant
\b
\
\
\
\
\
\
\

Automatic Drained 8.9 Qts. (8.5L)

Transmission
\b
\
\
\
\
\
\
\

Manual Drained 3.3 Qts. (3.2L)

Transmission
\b
\
\
\
\
\
\
\

Rear Axle Drained 3.3 Qts. (3.2L)
\b
\
\
\
\
\
\
\

Transfer Case Drained 2.6 Qts. (2.5L)
\b
\
\
\
\
\
\
\

(
1) - Capacities are recommended or calculated levels. Always use

dipstick to measure level.
\f
\
\
\
\
\
\
\

67,500 MILE (108,000 KM) NORMAL SERVICE
67,500 MILE (108,000 KM) NORMAL SERVICE\
\
\
\
\
\
\

VERIFY
\b
\
\
\
\
\
\
\

Last Major Service Was Performed
\b
\
\
\
\
\
\
\

REPLACE
\b
\
\
\
\
\
\
\

Engine Oil (
1)
\b
\
\
\
\
\
\
\

Engine Oil Filter (
2)
\b
\
\
\
\
\
\
\

(
1) - Change once a year or every 7,500 miles (12,000 KM).

(
2) - If mileage is less than 7,500 miles (12,000 KM) each year,

replace the oil filter at every oil change.
\b
\
\
\
\
\
\
\

LUBRICATION SPECIFICATIONS
\b
\
\
\
\
\
\
\

Material Condition Specification
\b
\
\
\
\
\
\
\

Engine Oil Ambient Temperature Less Than SAE 5W-30

(
1) 0F (-18C) To 100F (38C)

Page 1056 of 1501

$MITSUBISHI MONTERO 1998 Service Manual \b\ \ \ \ \ Ambient Temperature Above 0�F SAE 10W-30$

\b\
\
\
\
\

Ambient Temperature Above 0F SAE 10W-30

(-18C) To Over 100F (38C)
\b
\
\
\
\
\
\
\

(
1) - SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if

the Ambient Temperature is above 0 F (-18 C).
\b
\
\
\
\
\
\
\

FLUID CAPACITIES
\b
\
\
\
\
\
\
\

Item Condition Specification (1)
\b
\
\
\
\
\
\
\

Engine Oil Oil Pan 4.5 Qts. (4.3L)

(
1) \b \
\
\
\
\

Oil Filter 0.32 Qts. (0.3L)

\b
\
\
\
\
\

Oil Cooler 0.32 Qts. (0.3L)
\b
\
\
\
\
\
\
\

(
1) - Capacities are recommended or calculated levels. Always use

dipstick to measure level.
\f
\
\
\
\
\
\
\

75,000 MILE (120,000 KM) NORMAL SERVICE
75,000 MILE (120,000 KM) NORMAL SERVICE\
\
\
\
\
\
\

VERIFY
\b
\
\
\
\
\
\
\

Last Major Service Was Performed
\b
\
\
\
\
\
\
\

INSPECT
\b
\
\
\
\
\
\
\

Disc Brake Pads (
3)
\b
\
\
\
\
\
\
\

Brake Hoses (
3)
\b
\
\
\
\
\
\
\

Drive Shaft Boots (
3)
\b
\
\
\
\
\
\
\

REPLACE
\b
\
\
\
\
\
\
\

Engine Oil (
1)
\b
\
\
\
\
\
\
\

Engine Oil Filter (
2)
\b
\
\
\
\
\
\
\

(
1) - Change once a year or every 7,500 miles (12,000 KM).

(
2) - If mileage is less than 7,500 miles (12,000 KM) each year,

replace the oil filter at every oil change.

(
3) - Or inspect every year.
\b
\
\
\
\
\
\
\

LUBRICATION SPECIFICATIONS
\b
\
\
\
\
\
\
\

Material Condition Specification
\b
\
\
\
\
\
\
\

Engine Oil Ambient Temperature Less Than SAE 5W-30

(
1) 0F (-18C) To 100F (38C)

\b
\
\
\
\
\

Ambient Temperature Above 0F SAE 10W-30

(-18C) To Over 100F (38C)
\b
\
\
\
\
\
\
\

Brake Fluid All DOT 3 Or DOT 4
\b
\
\
\
\
\
\
\

(
1) - SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if

the Ambient Temperature is above 0 F (-18 C).

Page 1057 of 1501

$MITSUBISHI MONTERO 1998 Service Manual \b\ \ \ \ \ \ \ FLUID CAPACITIES$

\b\
\
\
\
\
\
\

FLUID CAPACITIES
\b
\
\
\
\
\
\
\

Item Condition Specification (1)
\b
\
\
\
\
\
\
\

Engine Oil Oil Pan 4.5 Qts. (4.3L)

(
1) \b \
\
\
\
\

Oil Filter 0.32 Qts. (0.3L)

\b
\
\
\
\
\

Oil Cooler 0.32 Qts. (0.3L)
\b
\
\
\
\
\
\
\

(
1) - Capacities are recommended or calculated levels. Always use

dipstick to measure level.
\f
\
\
\
\
\
\
\

82,500 MILE (132,000 KM) NORMAL SERVICE
82,500 MILE (132,000 KM) NORMAL SERVICE\
\
\
\
\
\
\

VERIFY
\b
\
\
\
\
\
\
\

Last Major Service Was Performed
\b
\
\
\
\
\
\
\

REPLACE
\b
\
\
\
\
\
\
\

Engine Oil (
1)
\b
\
\
\
\
\
\
\

Engine Oil Filter (
2)
\b
\
\
\
\
\
\
\

(
1) - Change once a year or every 7,500 miles (12,000 KM).

(
2) - If mileage is less than 7,500 miles (12,000 KM) each year,

replace the oil filter at every oil change.
\b
\
\
\
\
\
\
\

LUBRICATION SPECIFICATIONS
\b
\
\
\
\
\
\
\

Material Condition Specification
\b
\
\
\
\
\
\
\

Engine Oil Ambient Temperature Less Than SAE 5W-30

(
1) 0F (-18C) To 100F (38C)

\b
\
\
\
\
\

Ambient Temperature Above 0F SAE 10W-30

(-18C) To Over 100F (38C)
\b
\
\
\
\
\
\
\

(
1) - SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if

the Ambient Temperature is above 0 F (-18 C).
\b
\
\
\
\
\
\
\

FLUID CAPACITIES
\b
\
\
\
\
\
\
\

Item Condition Specification (1)
\b
\
\
\
\
\
\
\

Engine Oil Oil Pan 4.5 Qts. (4.3L)

(
1) \b \
\
\
\
\

Oil Filter 0.32 Qts. (0.3L)

\b
\
\
\
\
\

Oil Cooler 0.32 Qts. (0.3L)
\b
\
\
\
\
\
\
\

(
1) - Capacities are recommended or calculated levels. Always use

dipstick to measure level.
\f
\
\
\
\
\
\
\

90,000 MILE (144,000 KM) NORMAL SERVICE

Page 1058 of 1501

$MITSUBISHI MONTERO 1998 Service Manual 90,000 MILE (144,000 KM) NORMAL SERVICE\ \ \ \ \ \ \ $

90,000 MILE (144,000 KM) NORMAL SERVICE\
\
\
\
\
\
\

VERIFY
\b
\
\
\
\
\
\
\

Last Major Service Was Performed
\b
\
\
\
\
\
\
\

SERVICE
\b
\
\
\
\
\
\
\

Ball Joints With Grease Nipple (
6)
\b
\
\
\
\
\
\
\

Propeller Shaft Joints (
6)
\b
\
\
\
\
\
\
\

INSPECT
\b
\
\
\
\
\
\
\

Fuel Hoses (
3)
\b
\
\
\
\
\
\
\

Drive Belt (For Generator, Water Pump, Power Steering Pump)
\b
\
\
\
\
\
\
\

Manual Transmission Oil
\b
\
\
\
\
\
\
\

Transfer Oil
\b
\
\
\
\
\
\
\

Disc Brake Pads (
4)
\b
\
\
\
\
\
\
\

Brake Hoses (
4)
\b
\
\
\
\
\
\
\

Ball Joint & Steering Linkage Seals (
3)
\b
\
\
\
\
\
\
\

Drive Shaft Boots (
4)
\b
\
\
\
\
\
\
\

Exhaust System (
3)
\b
\
\
\
\
\
\
\

REPLACE
\b
\
\
\
\
\
\
\

Engine Oil (
1)
\b
\
\
\
\
\
\
\

Engine Oil Filter (
2)
\b
\
\
\
\
\
\
\

Engine Coolant
\b
\
\
\
\
\
\
\

Automatic Transmission Fluid
\b
\
\
\
\
\
\
\

Rear Axle Oil
\b
\
\
\
\
\
\
\

Air Cleaner Filter
\b
\
\
\
\
\
\
\

(
1) - Change once a year or every 7,500 miles (12,000 KM).

(
2) - If mileage is less than 7,500 miles (12,000 KM) each year,

replace the oil filter at every oil change.

(
3) - Or inspect every 2 years.

(
4) - Or inspect every year.

(
5) - Or change every 2 years.

(
6) - Or lubricate grease every 2 years.
\b
\
\
\
\
\
\
\

LUBRICATION SPECIFICATIONS
\b
\
\
\
\
\
\
\

Material Condition Specification
\b
\
\
\
\
\
\
\

Engine Oil Ambient Temperature Less Than SAE 5W-30

(
1) 0F (-18C) To 100F (38C)

\b
\
\
\
\
\

Ambient Temperature Above 0F SAE 10W-30

(-18C) To Over 100F (38C)

Page 1059 of 1501

$MITSUBISHI MONTERO 1998 Service Manual \b\ \ \ \ \ \ \ Engine All$

\b\
\
\
\
\
\
\

Engine All 50/50 Mixture Of

Coolant Distilled Water &

Ethylene Glycol
\b
\
\
\
\
\
\
\

Manual All API Classification GL-4

Transmission SAE 75W-85W Or 75W-90
\b
\
\
\
\
\
\
\

Automatic All "ATF DEXRON II" Or

Transmission Equivalent
\b
\
\
\
\
\
\
\

Brake Fluid All DOT 3 Or DOT 4
\b
\
\
\
\
\
\
\

Rear Axle All API Classification GL-5

Or Higher (
2)
\b
\
\
\
\
\
\
\

Transfer Case All API Classification GL-4

SAE 75W-85W Or 75W-90
\b
\
\
\
\
\
\
\

(
1) - SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if

the Ambient Temperature is above 0 F (-18 C).

(
2) - SAE90, 85W-90, 80W-90 may be used in temperatures above

-10 F (-23 C). SAE 80W, 80W-90 may be used in temperatures

from -30 F (-34 C) to -10 F (-23 C). SAE 75W may be used

in temperatures below -30 F (-34 C).
\b
\
\
\
\
\
\
\

FLUID CAPACITIES
\b
\
\
\
\
\
\
\

Item Condition Specification (1)
\b
\
\
\
\
\
\
\

Engine Oil Oil Pan 4.5 Qts. (4.3L)

(
1) \b \
\
\
\
\

Oil Filter 0.32 Qts. (0.3L)

\b
\
\
\
\
\

Oil Cooler 0.32 Qts. (0.3L)
\b
\
\
\
\
\
\
\

Engine Drained; With Reserve Tank 10 Qts. (9.5L)

Coolant
\b
\
\
\
\
\
\
\

Automatic Drained 8.9 Qts. (8.5L)

Transmission
\b
\
\
\
\
\
\
\

Manual Drained 3.3 Qts. (3.2L)

Transmission
\b
\
\
\
\
\
\
\

Rear Axle Drained 3.3 Qts. (3.2L)
\b
\
\
\
\
\
\
\

Transfer Case Drained 2.6 Qts. (2.5L)
\b
\
\
\
\
\
\
\

(
1) - Capacities are recommended or calculated levels. Always use

dipstick to measure level.
\f
\
\
\
\
\
\
\

97,500 MILE (156,000 KM) NORMAL SERVICE
97,500 MILE (156,000 KM) NORMAL SERVICE\
\
\
\
\
\
\

VERIFY
\b
\
\
\
\
\
\
\

Last Major Service Was Performed
\b
\
\
\
\
\
\
\

Page 1060 of 1501

$MITSUBISHI MONTERO 1998 Service Manual REPLACE \b \ \ \ \ \ \$

REPLACE
\b
\
\
\
\
\
\
\

Engine Oil (
1)
\b
\
\
\
\
\
\
\

Engine Oil Filter (
2)
\b
\
\
\
\
\
\
\

(
1) - Change once a year or every 7,500 miles (12,000 KM).

(
2) - If mileage is less than 7,500 miles (12,000 KM) each year,

replace the oil filter at every oil change.
\b
\
\
\
\
\
\
\

LUBRICATION SPECIFICATIONS
\b
\
\
\
\
\
\
\

Material Condition Specification
\b
\
\
\
\
\
\
\

Engine Oil Ambient Temperature Less Than SAE 5W-30

(
1) 0F (-18C) To 100F (38C)

\b
\
\
\
\
\

Ambient Temperature Above 0F SAE 10W-30

(-18C) To Over 100F (38C)
\b
\
\
\
\
\
\
\

(
1) - SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if

the Ambient Temperature is above 0 F (-18 C).
\b
\
\
\
\
\
\
\

FLUID CAPACITIES
\b
\
\
\
\
\
\
\

Item Condition Specification (1)
\b
\
\
\
\
\
\
\

Engine Oil Oil Pan 4.5 Qts. (4.3L)

(
1) \b \
\
\
\
\

Oil Filter 0.32 Qts. (0.3L)

\b
\
\
\
\
\

Oil Cooler 0.32 Qts. (0.3L)
\b
\
\
\
\
\
\
\

(
1) - Capacities are recommended or calculated levels. Always use

dipstick to measure level.
\f
\
\
\
\
\
\
\

105,000 MILE (168,000 KM) NORMAL SERVICE
105,000 MILE (168,000 KM) NORMAL SERVICE\
\
\
\
\
\
\

VERIFY
\b
\
\
\
\
\
\
\

Last Major Service Was Performed
\b
\
\
\
\
\
\
\

INSPECT
\b
\
\
\
\
\
\
\

Disc Brake Pads (
3)
\b
\
\
\
\
\
\
\

Brake Hoses (
3)
\b
\
\
\
\
\
\
\

Drive Shaft Boots (
3)
\b
\
\
\
\
\
\
\

REPLACE
\b
\
\
\
\
\
\
\

Engine Oil (
1)
\b
\
\
\
\
\
\
\

Engine Oil Filter (
2)
\b
\
\
\
\
\
\
\

(
1) - Change once a year or every 7,500 miles (12,000 KM).

(
2) - If mileage is less than 7,500 miles (12,000 KM) each year,

replace the oil filter at every oil change.

Page 1061 of 1501

$MITSUBISHI MONTERO 1998 Service Manual (3) - Or inspect every year. \b \ \ \ \ \ \$

(3) - Or inspect every year.
\b
\
\
\
\
\
\
\

LUBRICATION SPECIFICATIONS
\b
\
\
\
\
\
\
\

Material Condition Specification
\b
\
\
\
\
\
\
\

Engine Oil Ambient Temperature Less Than SAE 5W-30

(
1) 0F (-18C) To 100F (38C)

\b
\
\
\
\
\

Ambient Temperature Above 0F SAE 10W-30

(-18C) To Over 100F (38C)
\b
\
\
\
\
\
\
\

Brake Fluid All DOT 3 Or DOT 4
\b
\
\
\
\
\
\
\

(
1) - SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if

the Ambient Temperature is above 0 F (-18 C).
\b
\
\
\
\
\
\
\

FLUID CAPACITIES
\b
\
\
\
\
\
\
\

Item Condition Specification (1)
\b
\
\
\
\
\
\
\

Engine Oil Oil Pan 4.5 Qts. (4.3L)

(
1) \b \
\
\
\
\

Oil Filter 0.32 Qts. (0.3L)

\b
\
\
\
\
\

Oil Cooler 0.32 Qts. (0.3L)
\b
\
\
\
\
\
\
\

(
1) - Capacities are recommended or calculated levels. Always use

dipstick to measure level.
\f
\
\
\
\
\
\
\

112,500 MILE (187,500 KM) NORMAL SERVICE
112,500 MILE (187,500 KM) NORMAL SERVICE\
\
\
\
\
\
\

VERIFY
\b
\
\
\
\
\
\
\

Last Major Service Was Performed
\b
\
\
\
\
\
\
\

REPLACE
\b
\
\
\
\
\
\
\

Engine Oil (
1)
\b
\
\
\
\
\
\
\

Engine Oil Filter (
2)
\b
\
\
\
\
\
\
\

(
1) - Change once a year or every 7,500 miles (12,000 KM).

(
2) - If mileage is less than 7,500 miles (12,000 KM) each year,

replace the oil filter at every oil change.
\b
\
\
\
\
\
\
\

LUBRICATION SPECIFICATIONS
\b
\
\
\
\
\
\
\

Material Condition Specification
\b
\
\
\
\
\
\
\

Engine Oil Ambient Temperature Less Than SAE 5W-30

(
1) 0F (-18C) To 100F (38C)

\b
\
\
\
\
\

Ambient Temperature Above 0F SAE 10W-30

(-18C) To Over 100F (38C)
\b
\
\
\
\
\
\
\

(
1) - SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if

the Ambient Temperature is above 0 F (-18 C).
\b
\
\
\
\
\
\
\

Page 1062 of 1501

$MITSUBISHI MONTERO 1998 Service Manual FLUID CAPACITIES \b \ \ \ \ \ \$

FLUID CAPACITIES
\b
\
\
\
\
\
\
\

Item Condition Specification (1)
\b
\
\
\
\
\
\
\

Engine Oil Oil Pan 4.5 Qts. (4.3L)

(
1) \b \
\
\
\
\

Oil Filter 0.32 Qts. (0.3L)

\b
\
\
\
\
\

Oil Cooler 0.32 Qts. (0.3L)
\b
\
\
\
\
\
\
\

(
1) - Capacities are recommended or calculated levels. Always use

dipstick to measure level.
\f
\
\
\
\
\
\
\

120,000 MILE (200,000 KM) NORMAL SERVICE
120,000 MILE (200,000 KM) NORMAL SERVICE\
\
\
\
\
\
\

VERIFY
\b
\
\
\
\
\
\
\

Last Major Service Was Performed
\b
\
\
\
\
\
\
\

SERVICE
\b
\
\
\
\
\
\
\

Ball Joints With Grease Nipple (
6)
\b
\
\
\
\
\
\
\

Propeller Shaft Joints (
6)
\b
\
\
\
\
\
\
\

INSPECT
\b
\
\
\
\
\
\
\

Fuel Hoses (
3)
\b
\
\
\
\
\
\
\

Fuel System (Tank, Pipe Line, Connection & Fuel Tank Filler

Tube Cap) (
3)
\b
\
\
\
\
\
\
\

Evaporative Emission Control System (Except Evaporative

Emission Canister) (
7)
\b
\
\
\
\
\
\
\

Drive Belt (For Generator, Water Pump, Power Steering Pump)
\b
\
\
\
\
\
\
\

Manual Transmission Oil
\b
\
\
\
\
\
\
\

Transfer Oil
\b
\
\
\
\
\
\
\

Disc Brake Pads (
4)
\b
\
\
\
\
\
\
\

Brake Hoses (
4)
\b
\
\
\
\
\
\
\

Ball Joint & Steering Linkage Seals (
3)
\b
\
\
\
\
\
\
\

Drive Shaft Boots (
4)
\b
\
\
\
\
\
\
\

Exhaust System (
3)
\b
\
\
\
\
\
\
\

Distributor Cap & Rotor (
7)
\b
\
\
\
\
\
\
\

REPLACE
\b
\
\
\
\
\
\
\

Engine Oil (
1)
\b
\
\
\
\
\
\
\

Engine Oil Filter (
2)
\b
\
\
\
\
\
\
\

Load next 8 pages

Page: < prev 1-10 ... 41-48 49-56 57-64 65-72 73-80 81-88 89-96 97-104 105-112 ... 128 next >

height turn signal bulb hood release engine oil capacity length radiator