1998 Lexus LS400 alarm

KEYS AND DOORS
11 If you make your own duplicate key, you will not be able to cancel
the system or start the engine.
For vehicles sold in U.S.A.
FCC ID: MOZ RI4ATY
MADE IN JAPAN
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
For vehicles sold in Canada
This device complies with RSS210 of Industry and
Science Canada.
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
WIRELESS REMOTE CONTROL*
11L027
1
Locking the doors and sounding an alarm
2
Unlocking the doors
3
Indicator light
4
Unlocking the trunk lid
NOTE: *This feature can be set inoperative as vehicle theft
deterrent measure in case of the loss of the wireless remote
control key. Ask your Lexus dealer for details.
When you operate any button on the key, push it slowly and surely.
The operational range of the wireless remote control is
approximately 1 meter (3 feet). The effective range may vary with
different conditions. To activate the wireless remote control without
fail, do it approximately 1 meter (3 feet) from your Lexus.

KEYS AND DOORS
12In the following cases, the battery in the key may be discharged. If
this is a case, replace it using a special screwdriver.
The remote control does not work.
The operational range of wireless remote control becomes
extremely short.
The indicator light on the key is dimmed or does not come on.
For the replacement of the battery, see ”Replacing the battery” on
page 16. You can also have the battery of the key replaced by your
Lexus dealer.
If you lose the wireless key, contact your Lexus dealer as soon as
possible to avoid the possibility of theft, or an accident.
You can use up to 4 wireless remote control keys for the same
vehicle. Contact your Lexus dealer for detailed information.
The wireless remote control key is an electronic component.
Observe the following instructions in order not to cause damage
on the key.
Do not leave the wireless remote control key on the places where
the temperature becomes high such as on the dashboard.
Do not disassemble it.
Avoid knocking it hard against other objects or dropping it.
Avoid putting it in water.
Locking/Unlocking the doors
When you push the ”LOCK” button on the key briefly, all the
doors can be locked from outside the vehicle.
At this time, you can hear one beep.* However, when you push the
”LOCK” button with any door not closed securely, the buzzer
sounds for 10 seconds.** To stop the buzzer, close all the doors
securely or push the ”UNLOCK” button. If the key is in the ignition
switch, locking cannot be done.
Make sure all the doors are locked when you leave the vehicle. Push
the ”LOCK” button once again. If they were already locked, the turn
signal lights will flash.***
NOTE: *The volume of beep sound can be changed. **The
buzzer can be set not to sound with any door not closed securely.
***The turn signal lights can be set not to flash. Ask your Lexus
dealer for details.
NOTICE
Do not push the ”LOCK” button any longer than 2 to 3 seconds.
Pushing the button longer activates an alarm. For details, see
page 14.
When you push the ”UNLOCK” button, the driver’s door is
unlocked. Pushing that button once again within 3 seconds from
the first push, all other doors are also unlocked.*
NOTE: *Unlocking by a 2time operation can be changed. Ask
your Lexus dealer for details.

KEYS AND DOORS
14
Unlocking the trunk lid
11L0132
When you keep the button pushed for about 1 second, you can
unlock the trunk lid.* One beep sounds.
This function does not work when the ignition key is in the ”ON”
position.
NOTE: *The operation method can be changed. Ask your Lexus
dealer for details.
Sounding an alarm*
11L0143
When you push the ”LOCK” button for about 2 to 3 seconds, an
alarm sounds to deter any person trying to break into or damage
your vehicle.
If you want to stop the alarm, push any button.
This function does not work when the ignition key is in the ”ON”
position.
NOTE: *The alarm can be set not to sound. Ask your Lexus
dealer for details.

THEFT DETERRENT
117
THEFT DETERRENT SYSTEM
To deter theft of the vehicle, this system is designed to give an
alarm if any of the doors, trunk or hood is forcibly unlocked or
the battery terminal is disconnected and then reconnected while
the vehicle is locked.*
NOTE: *The system operating condition can be changed. Ask
your Lexus dealer for details.
The alarm blows the horn intermittently and flashes the headlights,
tail lights and other exterior lights.
17L001
Setting the system
1. Turn the ignition key to the ”LOCK” position and remove it.
2. Close and lock all the doors, trunk and hood using an ignition
key or wireless remote control.If you lock them with wireless remote control, the turn signals flash
once.* If you do not want to make them flash, consult with your
Lexus dealer.
NOTE: *The turn signals can be set not to flash. Ask your Lexus
dealer for details.
The indicator light will come on when all the doors, trunk and hood
are closed and locked.
3. After 30 seconds, the indicator flashes and the system is set.
Cancelling the system
When you unlock any door or trunk using an ignition key or
wireless remote control, the system is cancelled.
If you unlock any door or trunk with wireless remote control, the turn
signals flash twice.* If you do not want to make them flash, consult
with your Lexus dealer.
NOTE: *The turn signals can be set not to flash. Ask your Lexus
dealer for details.
Activating the system
The alarm sounds for 60 seconds if any of the following are operated:
Unlocking any door or trunk without using an ignition key or
wireless remote control.
Opening the hood forcibly.
Reconnecting the battery.

THEFT DETERRENT
118If any door is unlocked and the ignition key is not in the ignition
switch during the alarm sounding, its door is automatically locked.
To stop the alarm: Use either of the following methods.
Unlock the door or trunk using an ignition key or wireless remote
control.
Turn the ignition switch on.
Testing the system
1. Open all the windows.
2. Set the system as described above.
The front doors should be locked with the ignition key or wireless
remote control. Be sure to wait until the indicator light starts
flashing.
3. Unlock one of the doors from the inside.
The system should activate the alarm.
4. Unlock any of the doors with a key or the wireless remote
control to cancel the system.
5. Repeat this operation for the other doors and hood.
When testing the hood, also check that the system is activated when
the battery terminal is disconnected and then reconnected.
If the system does not work properly, have it checked by your Lexus
dealer.
NOTICE
Disconnecting the battery may result in the erasure of
information you have set in the computer memory. After
reconnecting the battery, check that the memorized data has
been retained. If it has been erased, input it into the computer
once more.

STARTING AND DRIVING
174
VEHICLE SKID CONTROL SYSTEM
The vehicle skid control system helps to provide comprehensive
control of the systems such as an antilock brake system,
traction control, engine control, electronically modulated air
suspension, etc. This system automatically controls the output
of the brakes or engine to help prevent the vehicle from skidding
when cornering on a slippery road surface or abrupt steering
wheel operation occurs.
31L0521
Slip indicator light
If the vehicle is going to skid during driving, the slip indicator light
flashes and an alarm sounds.
The vehicle skid control activates when the vehicle speed is about
more than 15 km/h (9 mph).Depressing the brake pedal repeatedly causes a small noise from the
engine compartment. This is a pump pulsating sound of the brake
system and it is not a malfunction.
You may hear a slight clicking noise in the engine compartment for
a few seconds when the engine is started or just after the vehicle is
started. This means that the vehicle skid control is in the selfcheck
mode and does not indicate a malfunction.
31L017-2
You can turn off the vehicle skid control system by pushing the
”VSC OFF” switch. The ”VSC OFF” indicator comes on. At
this time, the traction control system also turns off. You cannot
turn off either one of them. Pushing the ”VSC OFF” switch a
second time turns the system back on and extinguishes the ”VSC
OFF” indicator light.
When you turn the ignition switch on, this system always turns on.

STARTING AND DRIVING
176
CAUTION
Do not rely excessively on the vehicle skid control system.
Even if the vehicle skid control system is operating, it is not
that your vehicle is absolutely safe. Reckless driving will
result in an unexpected accident. Always keep safety
driving in mind. If the slip indicator light flashes, sounding
an alarm, special care should be taken while driving.
Only use tires of specified size. The size, manufacturer,
brand and tread pattern for all 4 tires should be the same.
If you use the tires other than specified, or different type or
size, the vehicle skid control system may not function
correctly. When replacing the tires or wheels, contact your
Lexus dealer.
BRAKE SYSTEM
The tandem master cylinder brake system is a hydraulic system with
two separate subsystems. If either subsystem should fail, the other
will still work. However, the pedal will be harder to press, and your
stopping distance will be longer. Also, the brake system warning
light may come on.
CAUTION
Do not drive your vehicle with only a single brake system.
Have your brakes fixed immediately.
Brake booster
The brake booster uses engine vacuum to powerassist the brakes.
If the engine should quit while you are driving, you can bring the
vehicle to a stop with normal pedal pressure. There is enough
reserve vacuum for one or two stops but no more!
CAUTION
Do not pump the brake pedal if the engine stalls. Each push
on the pedal uses up your vacuum reserve.
Even if the power assist is completely lost, the brakes will
still work. But you will have to push the pedal hard much
harder than normal. And your braking distance will be
longer.