1998 Lexus ES300 Dashboard light

KEYS AND DOORS9
11L023-2
Do not bend the key grip.
 Do not cover the key grip with any material that cuts off
electromagnetic waves.
 Do not knock the key hard against other objects.
 Do not leave the key exposed to high temperatures for a long period,
such as on the dashboard and hood under the direct sunlight.
 Do not put the key in water or wash it in an ultrasonic washer.
 Do not use the key with electromagnetic materials.
ENGINE IMMOBILISER SYSTEM
11L024±2
The engine immobiliser system is a theft prevention system. When you
insert the key in the ignition switch, the transponder chip in the key's head
transmits an electronic code to the vehicle. The engine will start, only
when the electronic code in the chip corresponds to the r egistered ID code
for the vehicle.
The system is automatically set when the key is removed from the ignition
switch. At this time, the security indicator light at the bottom of the instrument
cluster flashes. When you insert the key in the ignition switch, the security
indicator light goes out and the system is canceled automatically, which
enables the engine to start.
For your Lexus dealer to make you a new key with built±in transponder ch\
ip,
your dealer will need your key number and master key. However, there is a
limit to the number of additional keys your Lexus dealer can make for yo\
u.

KEYS AND DOORS11
You can use up to 4 wireless remote control transmitters for the same vehic\
le.
Contact your Lexus dealer for detailed information.
The wireless remote control transmitter is an electronic component.
Observe the following instructions in order not to cause damage on the
transmitter.

Do not leave the transmitter on the places where the temperature becomes
high such as on the dashboard.
 Do not disassemble it.
 Avoid knocking it hard against other objects or dropping it.
 Avoid putting it in water.
Locking/Unlocking the doors
When you push the ºLOCKº button on the transmitter, all the doors can
be locked from outside the vehicle.
At this time, the parking, tail, side marker and license plate lights flas\
h 1 time
sounding 1 beep. However, when you push the ºLOCKº button with any door
not closed securely, the buzzer sounds for 10 seconds or until all the doors are
closed securely. If the key is in the ignition switch or any of the doors are open,
locking cannot be done.
Make sure all the doors are locked when you leave the vehicle.
When you push the ºUNLOCKº button, the driver's door is unlocked.
Pushing that button once again within 3 seconds from the first push, all
other doors also unlock. At this time, 2 beeps sound. Together with the activation of unlocking, the
parking, tail, side marker and license plate lights flash 2 times. If the key i\
s
in the ignition switch, unlocking cannot be done.
You have 30 seconds to open a door after using the wireless remote unlock
feature. If a door is not opened by then, all the doors will be automat\
ically
locked again.
If the ºLOCKº or ºUNLOCKº switch is kept pressed in, the loc\
king or
unlocking operation is not repeated. Release the button and then push again.11E001±2

1
Off 2Louder
When you push the remote control switch, the vehicle sounds one beep when
the doors are locked by remote control, and two beeps when the doors are
unlocked.
You can adjust the beep loudness with the knob under the instrument panel.
Turning the knob clockwise increases the volume and turning it
counterclockwise until it stops turns the buzzer off.