Page 282 of 370
Maintenance and Care
283
[MC09500(ALL)01/96]
17-1/2 pica
art:0050025-B
Engine coolant recovery reservoir fill location
%*
[MC09600(ALL)05/96
]
Use Ford Premium Cooling System Fluid or an equivalent
engine coolant that meets Ford Specification ESE-M97B44-A. Do
not use alcohol or methanol antifreeze and do not use engine
coolant mixed with alcohol or methanol antifreeze. If you do
not use the proper coolant, the aluminum radiator on your
vehicle will corrode.
*
[MC09700(ALL)05/96]
Whenever you remove the radiator cap, make sure that you also
check the condition of the radiator cap rubber seals. Make sure
they are clean and free of any dirt. Rinse off with water, if
necessary. When you replace the radiator cap, make sure the
radiator filler neck seats are clean. Also check that the overflow
hose is not kinked or turned in such a way that prevents an
easy flow.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996
Page 283 of 370
![FORD WINDSTAR 1998 1.G Owners Manual 284
*
[MC09800(ALL)05/96]
Never remove the radiator cap while the engine is running or
hot. If you must remove the radiator cap, follow these steps to
avoid personal injury that can be caused by escap FORD WINDSTAR 1998 1.G Owners Manual 284
*
[MC09800(ALL)05/96]
Never remove the radiator cap while the engine is running or
hot. If you must remove the radiator cap, follow these steps to
avoid personal injury that can be caused by escap](/manual-img/11/5414/w960_5414-282.png)
284
*
[MC09800(ALL)05/96]
Never remove the radiator cap while the engine is running or
hot. If you must remove the radiator cap, follow these steps to
avoid personal injury that can be caused by escaping steam or
engine coolant.
*
[MC09900(ALL)05/96]1.
Turn the engine off and let it cool before removing the
radiator cap. You should exercise care when removing the
cap, even from a cooled engine.
*
[MC10000(ALL)05/96]2.
When the engine is cool, wrap a thick cloth around the cap
and turn it slowly counterclockwise to the first stop.
*
[MC10100(ALL)05/96]3.
Step back while the pressure is released.
*
[MC10200(ALL)05/96]4.
When you are sure that all the pressure has been released,
use the cloth to press, turn, and remove cap.
[MC10300(ALL)01/96]5.
Stand away from the radiator opening while removing the
cap. Hot steam may blow out or hot engine coolant may
splash out.
%*
[MC10400(ALL)05/96]
Freezing Protection
*
[MC10500(ALL)05/96]
The factory-installed solution of Ford Premium Cooling System
Fluid and water will protect your vehicle tos35ÊF (s37ÊC).
Check the freeze protection rating of the engine coolant at least
once a year, just before winter.
% [MC10600(ALL)01/96]
Add engine coolant only to the engine coolant recovery
reservoir Ð not to the radiator. If the coolant level is low, add
to the engine coolant recovery reservoir a 50/50 mixture of
water and the type of engine coolant that Ford specifies. If the
coolant recovery reservoir is empty, you should also check the
radiator to see if it is low. Check the coolant level again the
next few times you drive your vehicle.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996
Page 284 of 370
![FORD WINDSTAR 1998 1.G Owners Manual Maintenance and Care
285
*
[MC10700(ALL)05/96]
Ford Premium Cooling System Fluid is an optimized formula
that will protect all metals and rubber elastomers used in Ford
engines for four years or 50,00 FORD WINDSTAR 1998 1.G Owners Manual Maintenance and Care
285
*
[MC10700(ALL)05/96]
Ford Premium Cooling System Fluid is an optimized formula
that will protect all metals and rubber elastomers used in Ford
engines for four years or 50,00](/manual-img/11/5414/w960_5414-283.png)
Maintenance and Care
285
*
[MC10700(ALL)05/96]
Ford Premium Cooling System Fluid is an optimized formula
that will protect all metals and rubber elastomers used in Ford
engines for four years or 50,000 miles (80,000 km). It is not
necessary and not recommended to use supplemental coolant
additives in your gasoline powered vehicle. These additives may
harm your engine cooling system. Follow the recommended
service interval for changing your engine coolant.
*
[MC10800(ALL)05/96]
NOTE: When adding to or changing your engine coolant, it is
important to maintain a coolant concentration between
40% (s11ÊF [s24ÊC]) and 60% (s62ÊF [s52ÊC])
depending on your local climate conditions. When
coolant concentration falls below 40%, you will lose
freeze protection; above 60%, your engine may
overheat on a warm day. If coolant concentration is
outside this range, you may lose corrosion and rust
protection for the metals in your engine cooling
system.
[MC10900(ALL)01/96]
NOTE: Do not use an engine coolant that does not meet all
14 requirements of Ford specification ESE-M97B44-A.
The use of a coolant that does not meet the 14
requirements may void your warranty for the engine
cooling system. Use only a premium, nationally
recognized brand name engine coolant.
*
[MC11000(ALL)05/96]
Ford Motor Company expressly authorizes the Ford Rotunda
engine coolant recycling process and chemicals. Use only Ford
Rotunda recycled engine coolant or an equivalent non-Ford
Rotunda recycled engine coolant that is certified by the supplier
to meet Ford specification ESE-M97B44-A.
%*
[MC11100(ALL)05/96
]
NOTE: Always dispose of used automotive fluids in a
responsible manner. Follow your community's
standards for disposing of these types of fluids. Call
your local recycling center to find out about recycling
automotive fluids.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996
Page 285 of 370
![FORD WINDSTAR 1998 1.G Owners Manual 286
*
[MC11200(ALL)05/96]
Leave the coolant in all year. Make sure that the coolant will
not freeze at the temperature level in which you usually drive
during winter months. Keep an engine coolant in FORD WINDSTAR 1998 1.G Owners Manual 286
*
[MC11200(ALL)05/96]
Leave the coolant in all year. Make sure that the coolant will
not freeze at the temperature level in which you usually drive
during winter months. Keep an engine coolant in](/manual-img/11/5414/w960_5414-284.png)
286
*
[MC11200(ALL)05/96]
Leave the coolant in all year. Make sure that the coolant will
not freeze at the temperature level in which you usually drive
during winter months. Keep an engine coolant in your engine
that has a protection rating of at leasts20ÊF (s29ÊC).
*
[MC11300(ALL)05/96]
To find out how much engine coolant mixture your vehicle's
coolant system can hold, seeRefill CapacitiesinCapacities and
Specificationschapter.
[MC11400(ALL)01/96]
You may add water by itself only in an emergency, but you
should replace it with a 50/50 mixture of water and coolant as
soon as possible.
*
[MC11500(ALL)05/96]
Have your dealer check the engine cooling system for leaks if
you have to add engine coolant more than once a month, or
you have to add more than a quart (liter) at a time.
%*
[MC11600(ALL)01/96]
Checking Hoses
*
[MC11700(ALL)01/96]
Inspect all engine and heater system hoses for deterioration,
leaks and loose clamps before adding or replacing engine
coolant. Make whatever repairs or replacements are necessary
using Motorcraft parts or their equivalents.
%*
[MC11800(ALL)05/96]
Engine Coolant Drain and Flush
[MC11900(ALL)01/96]
To drain and flush your engine coolant, youMUSTsee your
Ford dealer or refer to the procedure in the service manual.
Failing to do so could result in engine damage.
% [MC12000(ALL)04/96]
Power Steering Fluid
*
[MC12100(ALL)01/96]
Check the level of the power steering fluid at least twice a
year (i.e., every Spring and Fall).
*
[MC12200(ALL)01/96]
To check the level of your power steering fluid:
[MC12300(ALL)01/96]1.
Start the engine and let it run until the power steering fluid
reaches normal operating temperature. The power steering
fluid will reach the right temperature after at least five
minutes of idling or at least one mile (1 km) of driving.
File:11wnmcs.ex
Update:Tue Oct 8 10:24:50 1996
Page 324 of 370
Lubricant Specifications
ITEMFORD
PART NAMEFORD
PART NO.FORD
SPECIFICATIONBrake Master CylinderFord High
Performance DOT3
Brake FluidC6AZ-19542-ABESA-M6C25-ADoor WeatherstripsSilicone LubricantCOAZ-19553-AAESR-M13P4-AEngine CoolantFord Premium
Cooling System FluidE2FZ-19549-AAESE-M97B44-AEngine OilMotorcraft Super
Premium 5W30XO-5W30-QSPESE-M2C153-F and
API Certification
MarkHood Latch and
Auxiliary Catch, Door
and Liftgate HingesMulti-Purpose
Grease SprayD7AZ-19584-AAESR-M1C159-A
and
ESB-M1C93-APower Steering Pump
ReservoirMotorcraft Type F
Power Steering FluidE6AZ-19582-AAESW-M2C33-FTransaxle Automatic
OverdriveMotorcraft
MERCONÒXT-2-QDX
MERCONÒWheel Bearings, RearMotorcraft Premium
Long Life GreaseXG-1-C or
XG-1-KESA-M1C75-B
Page 349 of 370

Index
359
A
ABS warning light (see Anti-lock brake system)...... 12
Accessory position on the ignition............. 91
Additives, engine oil.................. 276
Air bag supplemental restraint system......167±168, 188
and child safety seats............168, 187±188
description...................167, 169
disposal...................... 173
driver air bag..................167, 169
indicator light..................... 17
operation...................... 169
passenger air bag.................. 169
proper seating................... 168
service and information labels............ 169
tone generator................... 173
wearing safety belts................. 167
Air cleaner filter, location............... 273
Air conditioning, manual heating and air
conditioning system............... 73
Alarm, activating remote personal............ 128
Antenna, radio (see Electronic sound system)...... 29,90
Antifreeze (see Engine coolant)............. 282
Anti-lock brake system (ABS)
description..................... 211
see also Brake.................... 211
warning light..................... 12
Anti-theft lug nuts and key............... 254
File:wnixs.ex
Update:Fri Oct 11 10:49:35 1996
Page 354 of 370

364
Compact disc player (see Electronic sound system) . . . 30, 36
Compact disc radio (see Electronic sound system)..... 30
Console, description.................. 121
Controls, mirrors................... 117
Coolant (see Engine coolant).............. 282
checking and adding................ 282
drain and flush................... 286
preparing for storage................ 328
proper solution................... 284
refill capacities................... 324
specifications..................283, 325
temperature gauge.................. 22
warnings...................... 282
Cupholder(s)...................... 90
Customer Assistance Center, Ford (U.S.)......... 332
Customer Assistance Centre, Ford of Canada...... 339
D
Daytime running light system.............. 88
Defrost
rear window..................... 83
windshield...................... 71
Dipstick....................... 277
automatic transaxle fluid............... 289
engine oil..................... 277
Disabled vehicle (see Towing)............. 268
Dispute Settlement Board............... 334
Doors........................ 108
door ajar warning light................ 17
lubricant specifications................ 325
File:wnixs.ex
Update:Fri Oct 11 10:49:35 1996
Page 356 of 370

366
Engine
does not start.................... 235
fuel injected engine, starting............. 205
fuel pump shut-off switch.............. 235
preparing to start.................. 205
service points.................... 273
storing your vehicle...............326±327
Engine block heater.................. 208
Engine coolant.................... 282
checking and adding................ 282
checking hoses................... 286
disposal..................278, 285, 290
drain and flush................... 286
preparing for storage................ 328
proper solution.............278, 284±285, 290
recovery reservoir................273, 282
specifications.................... 325
temperature gauge.................. 22
Engine coolant temperature gauge............ 22
Engine fan...................... 269
Engine oil...................... 276
changing oil and oil filter.............. 278
checking and adding................ 277
dipstick...................... 277
disposal..................278, 285, 290
engine oil pressure warning light............ 16
filter, specifications................. 323
refill capacities................... 324
specifications.................... 276
synthetic oil..................276±277
ªbreak-inº oils................... 4±5
viscosity....................276±277
File:wnixs.ex
Update:Fri Oct 11 10:49:35 1996