One-Piece Front 7h-n Signal Lamp Assembly
1. Remove the headlamp assembly .as shown. under
“One-Piece Composite Headlamp System” earlier
in
this section.
5. Turn the bulb assembly to.the left to remove it.
6. Put the new bulb assembly into the headlamp
assembly
and turn it to the right until it is tight.
7. Plug in the dectrical connector.
8. Put. the headlamp lens assembly back into the
vehicle. Install the two retaining clips.
2. Twist the bulb socket to-
remove it from the
headlamp assembly.
3. Pull the bulb straight out to remove it from
4. Push the new bulb into-the socket until it snaps
the socket.
into place.
5. Put the bulb socket-into the lamp assembly arid twist
it to the right until it is tight.
6. Put the headlamp assembly back into the vehicle.
Install the twwetainhg clips.
ProCarManuals.com
