1998 CHEVROLET CAMARO radiator cap

Downloaded from www.Manualslib.com manuals search engine When you decide it’s safe to lift the hood, here’s what
you’ll
see:
c‘
I
A. Electric Engine Cooling Fans
B. Radiator Pressure Cap
C. Coolant Recovery Tank
I A CAUTION:
An electric engine cooling fan under the hood can
start up even when the engine is not running and
can injure
you. Keep hands, clothing and tools
away
from any underhood electric fan.
If the coolant inside the coolant recovery tank is boiling,
don’t
do anything else until it cools down.
When it
is cool, remove the coolant recovery tank cap
and look at
the dipstick.
5-16

Downloaded from www.Manualslib.com manuals search engine If the overheat warning continues, there’s one more
thing you can try.
You can add the proper coolant
mixture directly
to the radiator, but be sure the cooling
system is cool before you do it.
A CAUTION:
Steam and scalding liquids from a hot cooling
system can blow out and burn you badly. They
are under pressure, and if you turn the radiator
pressure cap
-- even a little -- they can come out
at high speed. Never turn the cap when the
cooling system, including the radiator pressure
cap, is hot. Wait for the cooling system and
radiator pressure cap to cool if you ever have to
turn the pressure cap.
5-19

Downloaded from www.Manualslib.com manuals search engine How to Add Coolant to the Radiator
(3800 V6 Engine Only)
I NOTICE:
Your engine has a specific radiator fill procedure.
Failure to follow this procedure could cause your
engine to overheat and be severely damaged.
1. You can remove the radiator pressure cap when the
cooling system, including the radiator pressure cap
and upper radiator
hose, is no longer hot. Turn the
pressure cap slowly counterclockwise until it first
stops. (Don't press down while turning the
pressure cap.)
If you hear a hiss, wait for that to stop. A hiss means
there
is still some pressure left.
2. Then keep turning the pressure cap, but now push down
as you turn it. Remove the pressure cap.
5-20

Downloaded from www.Manualslib.com manuals search engine 5. Then fill the coolant recovery tank to FULL COLD.
6. Put the cap back on the coolant recovery tank, but
leave the radiator pressure cap
off.
7. Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine cooling fans.
8. By this time, the coolant level inside the radiator
filler neck may be lower.
If the level is lower, add
more
of the proper DEX-COOL@ coolant mixture
through the filler neck until the level reaches the
base of the filler neck.
5-22

Downloaded from www.Manualslib.com manuals search engine 9. Then replace the pressure cap. At any time during
this procedure if coolant begins
to flow out of the
filler neck, reinstall the pressure cap. Be sure the
arrows on the pressure cap line up like this.
How to Add Coolant to the Radiator
(V8 Engine Only)
NOTICE:
The LSl Engine (Code G) has a specific radiator
fill procedure. Failure to follow this procedure
could cause your engine to overheat and be
severely damaged.
5-23

Downloaded from www.Manualslib.com manuals search engine 1. You can remove the radiator pressure cap when the
cooling system, including the radiator pressure cap
and upper radiator hose, is no longer hot. Turn the
pressure cap slowly counterclockwise until it first
stops. (Don’t press down while turning
the
pressure cap.)
If you hear a hiss, wait for that to stop. A hiss means
there is still some pressure left.
2. Then keep turning the pressure cap, but now push
down as you turn it. Remove the pressure cap.
A CAUTION:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol,
and it will burn
if the engine parts are hot
enough. Don’t spill coolant on
a hot engine.
5-24

Downloaded from www.Manualslib.com manuals search engine 3.
4.
Fill with the proper DEX-COOL@ coolant mixture.
Continue
to fill the radiator up to the base of the
filler neck.
5.
6.
Rinse or wipe the spilled coolant from the engine
and compartment.
Start the engine and allow it to
run in idle for
approximately
four minutes. By this time, the
coolant level inside the radiator will be lower.
Add
more of the proper mixture through the filler neck
until the level reaches the base
of the filler neck.
7. Shut the engine off and replace the pressure cap. Be
sure the arrows
on the cap line up like this.
5-25

Downloaded from www.Manualslib.com manuals search engine When you open the hood of the 3800 V6 Engine you’ll see:
A. Engine Coolant Reservoir
€3. Battery
C. Radiator
Fill Cap
D. Engine Oil Fill Cap
E. Automatic Transmission
Dipstick
(If Equipped)
E Windshield Washer Reservoir
G. Engine Cooling Fans
H. Air Cleaner
I. Power Steering Reservoir
J. Engine Oil Dipstick
K. Brake Fluid Reservoir
L. Clutch Fluid Reservoir
(If Equipped)