19-26
Coolant fan, checking
Test requirements
Test procedure
Fuse No. 34 OK Coolant Fan Control (FC) thermal switch -F18- OK
- Disconnect 3-pin harness connector from coolant Fan Control (FC)
thermal switch -F18- at bottom left of radiator.
- Switch ignition on.
- Bridge terminal -1- and terminal -2- of harness connector using
auxiliary cables from VW1594 connector test kit.
Coolant fan -V7- must run on 1st speed.
Pa
ge 32 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1
