1998 AUDI A4 wiring

38-5


10 -
Bracket
For wiring harnessHook in wiring harnessMounted with valve body bolts
11 -
Bolt - 6 Nm
12 -
Transmission Vehicle Speed Sensor (VSS)
-G38- Removing and installing page 38
-40
13 -
Spacer sleeve
Height: 8 mm
14 -
Inner oil line Always replaceRemoving and installing page 38
-29
15 -
O-ring
Always replace
Pa
ge 5 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-7


22 -
Wiring harness
Always replace page 38
-42
Transmission Fluid Temperature Sensor -
G93- is integrated into the wiring harness Remove and install valve body to install
page 38
-22

Unhook from bracket for wiring harness,
item 10 Installation position wiring harness
connector: Flat part of rear collar points
toward oil pan, the tabs at collar are
horizontal
23 -
Bolt - 6 Nm
24 -
Sensor for transmission RPM -G182- Removing and installing page 38
-36
Pa
ge 7 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-12


Parts Catalog 6 -
ATF-strainer
Removing and installing page 38
-21
7 -
Bolt - 8 Nm
For mounting valve body: 1 bolt M6 x 30,
16 bolts M6 x 60 Observe tightening sequence page 38
-
26

8 -
Valve body
Removing and installing page 38
-22
Allocation according to transmission code
letters
9 -
Bolt - 8 Nm
10 -
Bracket
For wiring harnessHook in wiring harnessMounted with valve body bolts
Pa
ge 12 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-15


22 -
Wiring harness in transmission
Always replace page 38
-42
Transmission Fluid Temperature Sensor -
G93- is integrated into the wiring harness Remove and install valve body to replace
page 38
-22

Unhook from bracket for wiring harness,
item 10 Installation position wiring harness
connector: Flat part of rear collar points
toward oil pan, the tabs at collar are
horizontal
23 -
Bolt - 9 Nm
24 -
Sensor for transmission RPM -G182- Removing and installing page 38
-36
Pa
ge 15 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-16


25 -
Connector
Is connected at wiring harness in
transmission Must be disconnected before removing the
valve body
26 -
Bolt - 6 Nm
27 -
Bracket For solenoid valve
28 -
Solenoid Valve 4 -N91- With O-ringRemove and install valve body to replace
page 38
-22

29 -
Solenoid valve 3 -N90-
Without O-ringRemove and install oil pan to replace
page 38
-19

Pa
ge 16 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-22

Valve body, removing and installing


Notes:

Always replace a soiled or faulty valve body.
General repair notes page 00
-27
.

Rules of cleanliness for working on automatic
transmissions page 37
-148
.

Removing

- Removing oil pan page 38
-19
.

- Removing oil strainer page 38
-21
.

- Disconnect clip for wiring harness connectors (arrow).
Pa
ge 22 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-23

Only for Park/Neutral Position (PNP) Switch -
E17-

- Disconnect harness connector from Transmission Vehicle Speed
Sensor (VSS) -G38- (arrow).

Notes: - Loosen mounting bolts (arrows) of valve body and remove valve body
with wiring harness.
Only the marked mounting bolts (arrows) must be loosened.When loosening other bolts, the function of the valve body can be
influenced or the valve body splits up. The bolt (arrow) A is shorter and thinner than the other bolts. Observe
allocation.
Pa
ge 23 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-24

Only for transmission with hydraulic control
E18/2

- Disconnect harness connector from Transmission Vehicle Speed
Sensor (VSS) -G38- (-A-).
- Disconnect harness connector from Sensor for transmission RPM -
G182- (-B-).

Notes: - Loosen mounting bolts (arrows) of valve body and remove valve body
with wiring harness.
Only the marked mounting bolts (arrows) must be loosened.When loosening other bolts, the function of the valve body can be
influenced or the valve body splits up. The bolt (arrow A) is not installed on transmissions with hydraulic
control E18/2 and can therefore be disregarded.
Pa
ge 24 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1