00-20
Shims
Use a micrometer to measure the shims at
several points. Different tolerances make it
possible to obtain the exact shim thickness
required.
Check for burrs and signs of damage.
Only install shims that are in perfect
condition.
Gears, synchro-hubs, inner races for sliding
gears
Heat gears and synchro-hubs to approx. 100
C (212 F) before installing. Press in until stop
is reached so there is no axial play.
Heat inner races for sliding gears to approx.
100 C (212 F) when installing.
The temperature can be checked using
VAG1558 temperature tester.
Observe installation position.
Sliding gears
Pa
ge 11 of 14 General re
pair instructions
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.00.5
