Downloaded from www.Manualslib.com manuals search engine General Information00
Edition 03.97
Fuel tank or piping conveying fuel
Extreme caution is required when carrying out grinding and welding work in the area of the fuel tank or other parts which convey fuel. If doubt exists, such parts should be removed. If the fuel tank and fuel pipes have to be removed from the vehicle, they should be stored in accordance with safety precautions.
Electronic control units
Remove battery. Separate earth connections of the electronic control units.
Current Flow Diagrams, Electrical Fault Finding and Fitting Locations binder
Connect the earth of the electric welding equip- ment directly to the part to be welded. When doing this, ensure that no electrically insulating parts are located between the earth connections and the welding point. Do not allow electronic control units and electric cables to come into contact with the earth connection or the welding electrode.
Airbag system
Safety information General Body Repairs, Repair Group 69
Repair information General Body Repairs, Repair Group 69
Safety precautions for seat belt tensioners
Safety information General Body Repairs, Repair Group 69
Important!
Remove the seat belt tensioner units beforecommencing any cutting, straightening and panelbeating work in the area of these units.
If one or both seat belt tensioners have beenactivated in an accident, both seat belts have tobe replaced (the seat belts no longer rewind).
Repair information General Body Repairs, Repair Group 69
