Downloaded from www.Manualslib.com manuals search engine
10Removing and Installing Engine
Edition 11.96
- Detach the earth cable -1- from the top en-
gine/gearbox connecting bolt.
- Unplug connector -2- and pull out of the fix- ture.
- Take off cable -3- and -4- at the starter.
- Detach cables from the fixture at the starter and place to the side. Unbolt fixture.
- Detach fuel feed pipe -1- and fuel return flow
pipe -2- (press release catches).
Important!
Fuel feed pipe is pressurised! Place cleaning ragsaround the connection point before detaching thehose connections. After this, release the pressure
by carefully detaching the hose.
- Unplug the following electrical connections:
1 - Knock sensor I (G61) (black)
2 - Knock sensor II (G66) (brown)
3 - Engine speed sender (G28) (grey)
