MANUAL GEARBOX
Gearbox (Removal - Refitting)
21
REFITTING
Coat the walls of the guide tube and the fork pads
with
MOLIKOTE BR2 grease.
Place the fork onto the slots of the clutch thrust
bearing.
Assemble the gearbox on the engine taking care
not to alter the height of the engine.
Ensure the presence and correct positioning of
the engine- gearbox centering rings .
The presence of the stud (C) aids assembly.
86308R2
Refit:
- the engine sub-frame,
- the steering,
- the exhaust downpipe,
- the engine tie-bar.
SPECIAL NOTE FOR THE E7J ENGINE
Refit the exhaust downpipe before the right-
hand driveshaft.
Refit the other components by proceeding in the
reverse order to removal.
21-9
