1997 RENAULT KANGOO engine

EXHAUST
Pipe assembly
19
DIAGRAM OF EXHAUST PIPES AND LOCATION OF CUTTING AREAS
13125R
1 Catalytic converter
2 Silencer
ZC Pipe cutting area F8Q Engine
19-16

FUEL TANK
Fuel tank
19
In the engine compartment, disconnect the fuel
pump relay at (K) , which is located in the engine
connection unit.
12839S
DRAINING THE FUEL TANK ( Diesel version)
Since Diesel versions are not fitted with an electri-
cal fuel pump, a manual pump must be used to
drain the tank.
For example, the
INTAIRCO pneumatic siphoning
pump is suitable for this operation (see
EQUIPMENT catalogue),
Shunt tracks 3 and 5 and let the fuel flow until it
runs out in intermittent jets.
Disconnect the shunt.
Reconnect the relay.
Disconnect the battery.Remove the pump-sender unit steel access cover.
Remove the clip which shows if the assembly has
been pushed in (if fitted).
Disconnect the quick release union at (1), tool
Mot. 1265.
99641S
97163R2
Connect the pneumatic pump rubber tube to the
outlet union at (A).
Drain the tank.
19-18

ENGINE MOUNTING
Suspended engine mountings
19
12924G
D7F Engine
TIGHTENING TORQUES (in daN.m)
13359S
19-32

ENGINE MOUNTING
Suspended engine mountings
19
13359R3
D7F Engine
TIGHTENING TORQUES (in daN.m)
19-33

ENGINE MOUNTING
Suspended engine mountings
19
13086R2
F8Q Engine
TIGHTENING TORQUES (in daN.m)
19-34