Turn SignallMultifunction Lever
The lever on the left side of the steering column
includes your:
Turn Signal and Lane Change Signals
0 Headlamp High/Low Beam Changer
Flash-to-Pass
Windshield Wipers
Windshield Washer
0 Cruise Control
Turn and Lane Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal
a turn or a lane change.
To signal a
turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
An arrow on the instrument
panel will flash in the
direction of the turn or lane
change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until
you
complete your lane change. The lever will return by
itself when you release it.
2-37
ProCarManuals.com
If the arrows just stay on as you signal a turn or a lane
change,
a signal bulb may be burned out and other
drivers won’t see your
turn signal. If YOU have the
Driver Information Center, it will tell you
if you have a
burned out bulb. See “Driver Infomation Center” in
the Index.
If a bulb is burned out, replace it to help avoid an
accident.
If the arrows don’t go on at all when you
signal a turn, check the fuse and for burned-out bulbs.
See “Fuses and Circuit Breakers’’ in the Index.
Turn Signal On Chime
If your turn signal is left on for more than 4/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal.
To turn off the chime, move the turn signal lever
to the
off position.
Weadlamp High/Low Beam Changer
To change the headlamps
from low beam to high
beam
or high beam to low
beam, pull the turn signal
lever toward
you. Then
release
it. When the high
beams
are on, this light on
the instrument panel will
also be on.
Flash-To-Pass Feature
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass. It
works even if your headlamps are
off.
To use it, pull the turn signal lever toward you a little,
but not
so far that you hear a click.
If your headlamps are
off or on low beam, your
high-beam headlamps will turn on. They’ll stay on as
long
as you hold the lever toward you and the
high-beam indicator on the dash will come
on. Release
the lever to turn the high-beam headlamps off.
2-38
ProCarManuals.com
