Page 97 of 436

Remote Lock Confirmation Remote Power Sliding Door Operation (Option)
When
you use the key chain transmitter to lock your
vehicle, your park lamps will flash briefly to let you
know the command has been received.
If you press the
LOCK button again, within five seconds, the horn will
sound briefly and the park lamps will flash to let you
know
the vehicle is already locked.
If you would like to change the way the park lamps and
horn operate with Remote Lock Confirmation, see
“Locks and Lighting Choices”
in the Index.
Remote Unlock Confirmation
When you use your key chain transmitter to unlock your
vehicle or to operate the power sliding door
(if
equipped), your park lamps will flash briefly to let you
know the command was received.
If you would like to change the way the park lamps
operate with Remote Unlock confirmation, see “Locks
and Lighting Choices”
in the Index.
Remote Alarm
When you press the horn button on the key chain
transmitter, your vehicle’s park lamps
will flash and the
horn will sound. This
will allow you to attract attention,
if needed.
LOCK
L
If you have the optional
power sliding door (see
“Power Sliding Door”
later
in this section), your
remote transmitter will
have a button that has
a
van symbol on it. Press
it to open or close the
sliding door.
If the sliding door is locked, first unlock all doors (see
“Remote Driver’s Door and
All Door Unlock” earlier in
this section), then press the van symbol to open the
sliding door. Press the van symbol again to close the
sliding door.
You can operate the power sliding door with the remote
transmitter only when the power sliding door override
switch on the overhead console is disabled.
2-9
ProCarManuals.com
Page 98 of 436

Matching Transmitter(s) To Your Vehicle
Each key chain transmitter is coded to prevent another
transmitter from unlocking your vehicle.
If a transmitter
is lost or stolen,
a replacement can be purchased through
your retailer. Remember to bring any remaining
transmitters with you when you
go to your retailer.
When
the retailer matches the replacement transmitter
to your vehicle, any remaining transmitters must also
be matched. Once your retailer has coded the
new
transmitter, the lost transmitter will not unlock your
vehicle. Each vehicle can have only four transmitters
matched to
it.
See your retailer to match transmitters to another vehicle.
Battery Replacement
Under normal use, the battery in your key chain
transmitter should last about two years.
You can tell the battery is weak if the transmitter won’t
work at the normal range
in any location. If you have to
get close to your vehicle before
the transmitter works,
it’s probably time to change the battery.
I NOTICE:
When replacing the battery, use care not to
touch any
of the circuitry. Static from your
body transferred to these surfaces may damage
the transmitter.
2-10
ProCarManuals.com
Page 99 of 436
Replacing the Battery in the Remote Transmitter
1. Insert a flat object like a dime into the slot on the side
of the transmitter and twist to separate the halves.
2. Gently pry the battery out of the transmitter. Do not
use the metal flanges to ‘bpop out” the battery.
3. Reassemble the transmitter. Make sure the halves
are snapped together tightly
so water will not get in
4. Check the transmitter operation. If needed,
follow
the instructions on resynchronizing your
remote transmitter.
2-11
ProCarManuals.com
Page 100 of 436

Resynchronizing Your Remote Transmitter
Your Remote Lock Control System uses a continually
changing code for increased security. Normally, the
receiver
in your vehicle will keep track of this
changing code.
Loss of synchronization will occur if the transmitter
is activated more than
256 times while out of range
of the vehicle.
Loss of synchronization will occur after the battery
replacement if the transmitter is immediately
activated more than
16 times while out of range of
the vehicle.
If your key chain transmitter has stopped working, you
may need to resynchronize the transmitter to the vehicle
receiver. To do this, press the
LOCK and UNLOCK
buttons together and hold for at least seven seconds or
until the horn sounds if equipped with Content Theft
Deterrent. Check the transmitter operation.
Switchbanks
There are two sets of switchbanks located in the front of
the vehicle, The switches will vary with the options that
are on your vehicle. It
is useful to become familiar with
them since they are used frequently while operating
the vehicle.
Overhead Console Switchbank
This switchbank is located in the overhead console. The
switches that you may find
in this switchbank are the
Interior Lights Override, Power Sliding Door Override,
Power Sliding
Door, Power Rear Quarter Windows and
Sunroof.
If your vehicle does not have some of the
options controlled by these switches, there
will be a
blank button
in its place.
For more information, please see each of these features
in the Index.
2-12
ProCarManuals.com
Page 101 of 436

Instrument Panel Switchbank
This switchbank is located in the instrument panel below
the Comfort Controls. The switches and controls that
you may find
in this switchbank are the Rear Fan Knob,
Rear Window WiperNasher, Fog Lamps and Traction
Control.
If your vehicle does not have some of the
options controlled by these switches, there will
be a
blank button
in its place.
For more information, please see each
of these features
in the Index.
If your vehicle is not equipped with the Optional Rear
Climate Control system, there
will be a storage space in
this switchbank. The rubber mat can be removed for
cleaning. Snap the mat into place after cleaning.
Sliding Door
To open the sliding door from outside the vehicle, pull
the handle out and then pull the door toward
the rear. If
you slide the door all the way back, the door will rest in
a detent position. The door must overcome this detent
when closing.
To move the door forward, you must first pull the door
past
the open detent position.
Does your Oldsmobile have a sliding door on the left
side? If
it does, this door is designed to open only a little
if the fuel door is open. If this ever happens, don’t try to
force
the sliding door. Just close the left-side sliding
door. Then when the fuel filler door is closed, the
left-side sliding door can be opened normally.
2-13
ProCarManuals.com
Page 102 of 436
Sliding Door Lock
To unlock either sliding door from the outside using
your key, insert the key and turn it toward the rear of the
vehicle.
To lock the sliding door from the outside, turn
the key toward the front of the vehicle. Lock
the sliding door from inside the vehicle by moving
the manual locking lever down. Unlock it by moving the
lever up. If you have the optional power door locks, the sliding
door lock has a delay feature. See “Power Door Locks”
or “Locks and Lighting Choices” in the Index.
2-14
ProCarManuals.com
Page 103 of 436

Power Sliding Door (Option)
With this option, you can open and close the sliding
door with switches inside your vehicle.
If you have the
optional Remote Lock Control system, you can also
operate the sliding door
with your remote transmitter.
See “Remote Lock Control”
in the Index.
Leaving young children or pets unattended in
your vehicle can be dangerous. They could
operate the power sliding door.
A child or others
could
be injured. Do not leave children or pets
unattended in your vehicle.
111 To operate the power sliding
(I
c
C
door: the powel- sliding door
override switch must be
disabled. This switch
is
located in the overhead
console switchbank.
Pushing the bottom
of the button will disable the power
sliding door;
it will not operate when either of the power
door switches or
the power sliding door button on the
Remote Transmitter is pressed.
The power sliding door override switch
will also stop
the door immediately, while the door
is opening or
closing, when the override feature is enabled.
When your vehicle goes through an automatic car wash,
be sure the power sliding door override feature
is enabled.
2-15
ProCarManuals.com
Page 104 of 436

To open or close the sliding door, press and release one
of two power door switches.
/ Y
0
0
0
I
One is mounted on the wall, just in front of the right side
sliding door. The other switch is located
in the overhead
console switchbank.
The sliding door must be unlocked
for it to operate. The
key does not have to be in
the ignition. To help avoid
accidental operation
of the sliding door, disable the
power sliding door by pushing the power sliding door
override switch. When
the key is
in the ignition in the RUN position,
the power sliding door will only open if
the transaxle is
in PARK (P). The transaxle does not have to be in
PARK (P) to close the door.
If the override feature is not enabled and the power
sliding door
is open or in the process of closing when
you shift out
of PARK (P), a buzzer will sound. This is
a warning that the sliding door is not completely closed.
I
If you shift the transaxle out of PARK (P) and
accelerate before the power sliding door latches
closed, the door may reverse to the open position.
A child or others could fall out of the vehicle and
be injured. Always make sure the power sliding
door is closed and latched before you drive away.
ProCarManuals.com