1997 OLDSMOBILE CUTLASS warning

[x] Cancel search: warning

Page 195 of 353

OLDSMOBILE CUTLASS 1997  Owners Manual Towing Your Vehicle 
Try  to  have  an  Oldsmobile  retailer  or  a  professional 
towing  service  tow  your  Cutlass.  They  can  provide 
the  right  equipment  and  know-how  to  tow  your 
vehicl

Page 199 of 353

OLDSMOBILE CUTLASS 1997  Owners Manual Engine  Overheating 
You will  find  a  coolant  temperature  gage on your 
Oldsmobile’s  instrument  panel.  See “Engine  Coolant 
Temperature  Gage”  in  the Index. 
You will  also  find a 
lo

Page 200 of 353

OLDSMOBILE CUTLASS 1997  Owners Manual If Y :-team. Is (- --- 9~ Fron ur Engine 
If  you get the  overheat  warmng  but see or  hear  no 
steam,  the problem  may  not  be  too serious.  Sometimes 
the engine  can get a little too  hot  wh

Page 204 of 353

OLDSMOBILE CUTLASS 1997  Owners Manual I 
Adding  only  plain  water  to  your  cooling  system can  be  dangerous.  Plain  water,  or some  other 
liquid  like  alcohol,  can  boil  before  the  proper 
coolant  mix  will.  Your  vehicle

Page 208 of 353

OLDSMOBILE CUTLASS 1997  Owners Manual Changing a Flat  Tire 
If a  tire  goes  flat, avoid  further  tire  and  wheel  damage 
by  driving  slowly  to  a  level  place.  Turn 
on your  hazard 
warning  flashers. 
Changing  a  tire can  ca

Page 237 of 353

OLDSMOBILE CUTLASS 1997  Owners Manual When  to  Change  Engine  Oil 
If  any one of these  is true  for you,  use  the  short  triphity 
maintenance  schedule: 
0 
0 
0 
0 
0 
Most  trips  are  less  than 5 to 10 miles (8 to 16 km). 
This

Page 239 of 353

OLDSMOBILE CUTLASS 1997  Owners Manual Automatic  Transaxle  Fluid 
It is  not  necessary  to  check  the  transaxle  fluid  level. A 
transaxle  fluid  leak  is  the  only  reason  for fluid  loss.  If a 
leak  occurs,  take  the vehicle

Page 240 of 353

OLDSMOBILE CUTLASS 1997  Owners Manual What to Use 
Use  a mixture  of  one-half clean water (preferably 
distilled)  and  one-half 
DEX-COOL” coolant  which 
won’t  damage  aluminum  parts.  If  you  use  this  mixture, 
you  don’t